KW 3046 Bayliss Table Lamp
Product Information:
- Product Name: Bayliss Table Lamp
- Item Number: KW 3046
- Includes: Lamp base (A), Harp (C), Saddle (D), Shade (B),
Finial (A), Protective cover (E) - Tools Required (Not Included): Scissors
Product Usage Instructions:
- Remove all parts from the box and place them on a clean, soft
surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior to avoid
damages. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
NOTICE: This light fixture should be installed
in accordance with all applicable, local installation codes, and by
a person familiar with its construction and operation, as well as
the hazards involved. Inspect the item and its contents carefully.
If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
ASSEMBLY INSTRUCTIONS
A
B (Packaged separately) C Bulb not included D
E
Bayliss Table Lamp Item # KW 3046
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
