SP 3005 Cameron Table Lamp
Product Information
Product Name: Cameron Table Lamp
Item Number: SP 3005
Installation Requirements: This light fixture
should be installed in accordance with all applicable, local
installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved.
Package Contents: The package should include
the following parts:
- A – Finial
- B – Shade
- C – Harp
- D – Saddle
- E – Protective Plug Cover
Product Usage Instructions
- Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the
finial (A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning properly.
- The installation process is now complete.
Care Instructions
Clean the lamp using only a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: The lamp is listed for use in the United
States (UL Listed).
ASSEMBLY INSTRUCTIONS
A B
C D
E
Cameron Table Lamp
Item # SP 3005
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
