RL 3633 Halifax Small Table Lamp
Product Information
Halifax Small Table Lamp Item # RL 3633
This product is a small table lamp designed for indoor use. It
provides ambient lighting and is suitable for various settings such
as living rooms, bedrooms, and offices. The lamp requires a light
bulb (not included) and should be installed in accordance with all
applicable local installation codes by a person familiar with its
construction and operation.
Please inspect the item and its contents carefully before
installation. If any damage or defect is found, do not proceed with
the installation. Retain all packaging material until the
installation is complete and approved.
Assembly Instructions
Tools Required (Not Included):
Scissors
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) onto the saddle (E) and adjust the harp
(C) to the desired height. Then, tighten the adjustment knobs
(D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (F) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions
Clean the lamp only with a soft dry cloth or a feather duster.
Do not use abrasive or chemical agents that may damage the lamp’s
surface.
Please follow these instructions carefully to ensure safe and
proper usage of the Halifax Small Table Lamp.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D E
F
Halifax Small Table Lamp Item # RL 3633
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) onto saddle (E), adjust harp (C) to desired height, then
tighten adjustment knobs (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (F) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
