KW 3680 Nero Large Table Lamp
Product Information
Product Name: Nero Large Table Lamp
Item Number: KW 3680
Package Contents: A, B (packaged separately), C, D, E
(protective cover)
Tools Required (Not Included): Scissors
Notice: This light fixture should be installed in
accordance with all applicable, local installation codes, and by a
person familiar with the construction and operation of it, as well
as the hazards involved. Inspect item and contents carefully. If
any damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Remove the socket ring (C) from the socket (D).
- Remove the shade (B) from its packaging and install it onto the
socket (D) using the socket ring (C). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Place the diffuser (A) onto the top of the shade (B).
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is functioning properly.
Care Instructions
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: This product is listed and approved for use in the
United States.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately) Bulb not included C D
E
Nero Large Table Lamp Item # KW 3680
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (C) from socket (D). 3. Remove shade (B) from packaging and install to socket (D) using
socket ring (C). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into the socket. 5. Place diffuser (A) onto the top of shade (B). 6. Remove protective cover (E) from the plug. 7. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
L I ST ED
US
