HMW84 IP65 HF Motion Sensor with Bluetooth 5.0 SIG Mesh
Product Information
Product Name: IP65 HF Motion Sensor with 5.0
SIG Mesh
Model: HMW84 (High Bay)
Product Description: HMW84 is a Bluetooth DALI
high-bay HF motion sensor designed for installation heights of up
to 15m. It features a robust IP65 structure and offers three
different installation methods. With Bluetooth wireless mesh
networking, it enables easy communication without hardwiring,
providing added value to luminaires and cost savings for projects.
The device setup and commissioning can be done via a smartphone
app.
Features:
- Quick setup mode & advanced setup mode
- Tri-level control
- Daylight harvest
- Circadian rhythm (Human centric lighting)
- Floorplan feature to simplify project planning
- 40mA DALI/DALI2 Broadcast output
- 3 installation methods
- IP65 design
- High-bay (up to 15m height)
- Koolmesh Pro iPad version for on-site configuration
- 5-year warranty
- Grouping luminaires via mesh network
- Scenes
- Detailed motion sensor settings
- Dusk/Dawn photocell (Twilight function)
- Push switch configuration
- Schedule to run scenes based on time and date
- Astro timer (sunrise and sunset)
- Smartphone app for both iOS & Android platform
- Staircase function (primary & secondary)
- Internet-of-Things (IoT) featured
- Device firmware update over-the-air (OTA)
- Device social relations check
- Bulk commissioning (copy and paste settings)
- Dynamic daylight harvest auto-adaptation
- Web app/platform for dedicated project management
- Koolmesh Pro app for iPad
- Web app/platform: www.iot.koolmesh.com
- Power-on status (memory against power loss)
- Offline commissioning
- Different permission levels via authority management
- Network sharing via QR code or keycode
- Remote control via gateway support HBGW01
- Interoperability with Hytronik Bluetooth product portfolio
- Compatible with EnOcean BLE switches
- Fully support EnOcean self-powered switch module PTM215B
(HBES01/W & HBES01/B)
Product Usage Instructions
To use the IP65 HF Motion Sensor with 5.0 SIG Mesh (HMW84),
please follow the instructions below:
- Choose the desired installation method: ceiling mount, conduit,
or clamp. - Download the smartphone app for your iOS or Android
device. - Open the app and follow the device setup instructions.
- In the app, configure the motion sensor settings according to
your preferences. - If needed, set up tri-level control and daylight harvest
features. - Create scenes and schedule them based on time and date.
- If desired, configure the staircase function for primary and
secondary lighting. - If using EnOcean BLE switches, ensure compatibility and follow
the instructions for pairing and setup. - Utilize the web app/platform for dedicated project management
and simplify project planning using the floorplan feature. - For advanced setup and commissioning, use the quick setup mode
or switch to the advanced setup mode in the app. - Take advantage of the internet-of-things (IoT) features, such
as device firmware updates over-the-air (OTA), device social
relations check, and bulk commissioning. - Manage permissions and network sharing via QR code or
keycode. - For remote control, ensure gateway support (HBGW01) is
available and configured. - In case of power loss, the device has power-on status memory to
retain settings. - If needed, perform offline commissioning for specific
scenarios. - Refer to the user manual or contact customer support for
further assistance or troubleshooting.
IP65 HF Motion Sensor with
5.0 SIG Mesh
HMW84 (High Bay)
Tri-level Control & Daylight Harvest for Independent DALI/DALI2
RED
IP65
Product Description
HMW84 is a Bluetooth DALI high-bay HF motion sensor, with capability of
up to 15m installation height. It is designed with robust IP65 structure, and
offers 3 different installation methods. With Bluetooth wireless mesh
networking, it makes communication much easier without any hardwiring,
which eventually adds values to luminaires and saves costs for projects. Meanwhile, simple device setup and commissioning can be done via
Ceiling mount
conduit
app.
App Features
Hardware Features
clamp
Quick setup mode & advanced setup mode Tri-level control Daylight harvest
DCircadian rhythm (Human centric lighting) Floorplan feature to simplify project planning
40mA DALI/DALI2 Broadcast output
3 Meth
3 installation methods
IP IP65 design
High-bay (up to 15m height)
Web app/platform for dedicated project management Koolmesh Pro iPad version for on-site configuration
5-year warranty
rGrouping luminaires via mesh network
Scenes
a Detailed motion sensor settings
Dusk/Dawn photocell (Twilight function)
5.0 SIG mesh
Push switch configuration
iOS
Schedule to run scenes based on time and date
f Astro timer (sunrise and sunset)
Android
for iOS
for Android
Smartphone app for both iOS & Android platform
t Staircase function (primary & secondary)
Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Device social relations check Bulk commissioning (copy and paste settings) Dynamic daylight harvest auto-adaptation
for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com
Power-on status (memory against power loss) Offline commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio Compatible with EnOcean BLE switches
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Continuous development in progress…
Subject to change without notice.
Edition: 25 Jun. 2021 Ver. Draft Page 1/4
Technical Data
Input Characteristics Model No.
Mains voltage Stand-by power Load ratings:
Capacitive Resistive Warming-up
HMW84 220_240VAC 50/60Hz
<1W
800VA 1000W
20s
Sensor Data
Model No.
HMW84
Sensor principle
High Frequency (microwave)
Operation frequency
5.8GHz +/- 75MHz
Transmission power
<0.2mW
Detection range
Max installation height15m Max detection range10m (diameter)
Detection angle
360O
Safety and EMC EMC standard (EMC) Safety standard (LVD)
EN55015, EN61000-3-2/-3-3 EN60669-1, EN60669-2-1
Radio Equipment (RED)
EN300440, EN301489-1/-17/-3, EN62479,EN300328
Certification
CB, CE , EMC, RED, RCM
DMechanical Structures and Installations For more details, please refer to user manual.
r a f A.Ceilingmount
LED indicator Photocell
Environment Operation temperature IP rating
Bluetooth module
Sensor module
Cable entry
59.3 57.3 47.5
91.5 80.7 75
4.1
Ta: -20OC ~ +70OC IP65
t 4.1 66.6 81.5
Installation rack B. Screw to the Luminaire by conduit
LED indicator Photocell
Bluetooth module Cable entry
Sensor module
75
59.6
0.825″
64
66.6 89.9
35.2
47.5
57.3
59.3
Subject to change without notice.
Edition: 25 Jun. 2021 Ver. Draft Page 2/4
C. Attach to the shade by clamp
75 33.7
15
LED indicator Photocell
Bluetooth module
Angle adjustment Luminaire clamp
4.5
4.5 28.5
59.6 66.6
163.2
84.5 59.3 29
Sensor module
Note:We recommend the mounting distance between sensor to sensor should be more than 2m to prevent sensors from false-triggering.
Detection Pattern
D0
5
Ceiling mounted height(m)
10% 30%
r50% 75%
a 15
f t WiringDiagram
L N
Brown Blue Red Black
HMW84
L
LED
N Driver
DALI +
DALI –
Subject to change without notice.
Edition: 25 Jun. 2021 Ver. Draft Page 3/4
Placement Guide and Typical Range Smart Phone to Device Range
6-10m
10m
The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.
Additional Information / Documents
1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
D3. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
r 5. Regarding Hytronik standard guarantee policy, please refer to a f t www.hytronik.com/download->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 25 Jun. 2021 Ver. Draft Page 4/4
Catalogue_Hytronik
iot.koolmesh.com
