- Check the Brush ends for debris build-up or broken Belt
- Turn machine off and unplug from wall outlet
- Remove Clean Water and Dirty Water Tanks
- Recline and lay flat to access the brush area
- With a Phillips head screwdriver, unscrew the 1 Screw from the Belt Cover and remove
- Pull the Brush up and out of the brush housing, the belt can be removed by sliding off the motor pulley
- Clean or replace Brush or Belt if necessary
- Attach Belt to motor pulley and Brush, insert Brush into right side end cap
- Reattach the left end cap and slide Brush back into place, replace the Belt Cover and screw into place
- Manually rotate Brush to make sure it rotates freely and that the Belt is aligned properly
- Has this resolved the issue?
- Yes > Great! Glad we could get you back to cleaning!
- No > Visit a BISSELL Authorized Service Center or Contact Us
