MU0037 Height Adjustable TV Wall Mount
Product Information:
This product is a TV wall mount designed for use in wood stud or
solid concrete walls. It should not be installed into drywall
alone. The wall must be capable of supporting five times the weight
of the TV and mount combined to ensure proper installation and
prevent product damage or body injury.
It is important to note that this product contains small items
that could pose a choking hazard if swallowed.
Before starting the assembly, please verify that all parts are
included and undamaged. If there are any parts shortages or
damages, please contact us for assistance.
Product Usage Instructions:
- Read the installation instructions carefully before proceeding
with the installation. - Ensure that the wall where the TV mount will be installed is a
wood stud or solid concrete wall. Do not install into drywall
alone. - Check if the wall is capable of supporting five times the
weight of the TV and mount combined. - Inspect all parts included in the package to ensure they are
present and undamaged. - If there are any parts shortages or damages, contact us for
assistance. - Start the assembly by attaching the upper arm to the TV plate
using the provided wrench. - Attach the extenders to the upper arm using screws 3A and
3B. - Attach the wall plate cover to the extenders using screws
04. - Make sure to tighten all screws securely.
- Before mounting the TV, check the maximum distance specified on
the TV plate (MAX:400mm/16) and ensure your TV is compatible with
this mount. - Follow your TV manufacturer’s instructions to mount the TV onto
the TV plate.
If you have any doubts about the safety of the installation,
assembly, or use of this product, please contact us for further
guidance and assistance.
INSTALLATION INSTRUCTION
Safety Caution
Hardware Included
Please read this instruction carefully before installation.
V4
If you do not understand these instructions or have doubts about the safety of the installation, assembly
or use of this product, please contact us.
This product is designed for use in wood stud or solid concrete wall. – DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.
Upper Arm
TV Plate
Extenders
Wall Plate Cover
Wrench
01 x1
02 x1
3A x2 3B x2
04 x2
05 x1
Must Check Before Getting Started
MAX:400mm/16″
<16mm(5/8″)
Min. Wood Stud Size: nominal 4″(102mm) actual 3 1/2″(89mm)
Min. 8″ (203mm)
Nuts
Bolts
Allen key
Hardware (Wall /Product)
Lag Bolts 5/16 x 2½ in
Open-end wrench
Bubble Level ×1
MAX: 400mm/16″
Max: 66LBS (30KG)
Min. Wood Stud Size: nominal 2″(51mm) actual 1 1/2″(38mm)
Drywall with wood studs
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
Capatity:
11~66LBS (5~30KG)
Min: 100x100mm /4×4″ Max: 400x400mm/16×16″
If you have any questions, please feel free to contact us via Amazon.
WMA-44MU-DY
Warm Tips You could also refer to the Video Guide about installation on our product page.
Step 1-1 Select TV screw diameter
Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV.
M4 M6 M8
Step 1-2 Select TV screw length
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Too Short
Too Long
Correct
Correct
Step 2 Mesure your TV Pattern
Measure and note the width and the height
of the square or rectangle formed from the
VESA holes pattern .
8
Installation Tools (Not Included)
Wood Stud Installation Concrete Installation
7/32″ (5.5mm)
Stud Awl Wood
Finder
Drill Bit
3/8″ (10mm)
Masonry Hammer Drill Bit
2M
Band Tape
Pencil
Electrodrill
1/2″ (13mm)
Socket Screwdriver Wrench
1
StSetpep3-21 SeMlecstuTreVyPoluarteTVCopnaftitgeurrnation
Select the configuration A , B , C, D, or E to use based on the measurement from Step 2.
VESA (WxH)
Configuration
100mm x 100mm
A
130mm x 130mm
A
200mm x 100mm
A
200mm x 200mm
A
200mm x 300mm
B
200mm x 400mm
B
200 mm
VESA (WxH)
300mm x 200mm 300mm x 300mm 400mm x 200mm 400mm x 300mm 400mm x 400mm
Configuration
C E C D E
200 mm 130 mm 100 mm
A
For VESA: 100x100mm, 130x130mm,200x100mm, 200x200mm
400 mm 300 mm
400 mm 300 mm
C
For VESA: 400x200mm, 300x200mm
B
For VESA: 200x300mm, 200x400mm
400 mm
400 mm 300 mm
100mm 4in. 130mm 5 1/8in. 200mm 8in. 300mm 11 3/4in 340mm 13 3/4in. 400mm 16in.
)
2M
3
D
For VESA: 400x300mm
300 mm
E
For VESA: 300x300mm, 400x400mm
4
400 mm 300 mm
200 mm 130 mm 100 mm
200 mm
x8
x8
x1
6A
6B
6C
TV Screws / Washers
Philips Screws M4 x 12mm M4 x 30mm
Philips Screws M6 x 15mm M6 x 30mm
Philips Screws M8 x 25mm M8 x 45mm
x2
A
Spacers L10mm
Washers Ø6mm M4-5-6
x1
B
Spacers L5mm
x4 x4
x4 x4 x4 x4
x8
x4
M-A
M-B
M-C
M-D
M-E
Steepp33–22 AsAstetamcbhlethTeVbPralactkeeatsnd Extenders
x8
M-F
2
If your TV hole pattern is greater than 200x200mm, attach extenders [3AA] and [3B] to TV plate [02] using Nut [64AA] and Bolt [46BB].
3A 3B
3A
Step 3-3 Attach the TV Plate
B 6A
3B
6B
(a) For Flat Back M-A M-C
M-B
Use the shorter screws
Top of TV
No! M-E
Not for M8 screws
(b) For Round Back / Extra Space
M-A M-C M-B
Use the longer screws
Top of TV
M-E
Not for M8 screws
No!
M-D M-F
5
Step 4A Wall plate installation (Wood Stud)
A-1
Locate your studs. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge-to-edge stud finder.
A-2 01
Position the upper arm 01 at your desired height and line up the holes with your stud center line. Level the wall plate and mark the pilot hole locations x2.
Level
2 2
A-4
No!
Step 4B
Install wall plate 01 using lag bolts A
with Socket Wrench, NO Electrodrill.
01
Tighten the lag bolts A until they are
pulled firmly against the wall plate 01
A
04
Push
Attach the
wall plate
covers
04
Push
Wall plate installation (concrete or brick)
B-1 01
Position the wall plate 01 at your desired height , level the wall plate and mark the pilot hole locations x2.
Level
B-3
Install wall plate 01 using lag bolts A and anchors (not included) with Socket Wrench, NO Electrodrill. Tighten the lag bolts A until they are pulled firmly against the wall plate 01 . Tighten the lag bolts A until they are pulled firmly against the wall plate 01
Concrete wall anchor 2pcs (NOT INCLUDED)
Contact us to have these additional pieces shipped Ø10*61mm directly to you.
01 A
No!
04
Push
Attach the
wall plate
covers
04
Push
Step 5 Lift and Hang TV with Brackets onto Wall Bracket
Remove 2 preassembled screws and washers before
5-1 hang TV on to the wall bracket, and save them for
using to next step.
5-2 Lift and hang TV assembly onto arm and wall plate.
Secure the TV plate to the
5-3 arm and wall plate with the
removed screws and washers from the previous step.
A-3
B-2
7/32 in Ø5.5 mm
2.75in (70 mm)
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth
of 2 3/4 in (70 mm). Be sure to drill into the center of the stud. 6
STEP 6 Adjust Gas Spring Tension
For proper functioning of this mount, You might need to adjust tension in upper arm depending on different weight of TV.
05
Adjustments (Tilting Adjustment)
-15° +5°
Attention: The lower nut
will turn when the bolt is adjusted, it’s naturalDO NOT stop it turning.
Drill pilot holes
Ø 10 mm 2.75in 70 mm
3/8in Ø 10 mm
IMPORTANT NOTICE:
The gas spring is pre-set to minimum tension. Once TV is hanged on, hold TV with both hands and DO NOT let go suddenly or immediately. instead, leave TV in a slow & gentle way while observing whether the arms will fall
7 down wildly.
Cable Management
(Tilting)
Tilting Angle Adjustment (+5° / -15°) Loosen 2 tilting bolts, pull TV to your desired angle, then fasten tilting nuts with open-end wrench.
push the cables into
Through the cables
Product Dimensions:
6C
400 mm/16″
300 mm/12″
180 ° MAX285mm/11.2″
MIN244mm/9.6″
3JTFTVQ
‘BMMTEPXO
Situation 1: Arm falls down Upper Arm with TV falls down and fails to stay where intended. Solution: Turn the inside screw clockwise(“+”direction) to increase gas spring tension till the arm can stay as intended.
Situation 2: Arm rises up Upper Arm with TV rises up and fails to stay where intended. Solution: Turn the inside screw counterclockwise(“-“direction) to decrease gas spring tension till the arm can stay as intended.
As for how many circles the screw should be turned, refer to below diagram.
(AT LEAST)
9
(Leveling) Leveling adjustment (-3°/+3°)
If needed, TV can be leveled ±3 degrees via adjusting the 2 screws with the open end wrench.
± 3°
B
Loosen the screws Level the TV
B
Tighten the screws
10
161mm/6.3″
180 ° 230mm/9.1″
92mm/3.6″
8.5mm/0.33″ 126mm/ 4.97″
120mm/4.73″
400 mm/16″ 300 mm/12″
8
Remove the cover to put the cables into if necessary
180 ° 225mm/8.9″ 200mm/7.9″ 100mm/3.9″
+ 5.5°
-15.2°
– 3°/+ 3°
100mm/3.9″ 200mm/7.9″ 225mm/8.9″
36mm/1.42″ 8mm/0.31″ Ø8.5mm/0.33″
247mm/9.7″ MAX307mm/12.1″
MIN60mm/2.4”
11
