MP0053 Tilting TV Wall Mount
Product Information: – Maximum weight capacity: 99
lbs (45 kg) – Product dimensions: – Maximum: 600x400mm / 24×16 –
Minimum: 75x75mm / 3×3 – Model number: YZ2226-US1 – Tilt range:
42.5mm / 1.67 – Mounting hole compatibility: – Maximum: 600mm / 24
– Minimum: 75mm / 3 – Safety caution: This product is designed for
use in wood stud or solid concrete walls. Do not install into
drywall alone. The wall must be capable of supporting five times
the weight of the TV and mount combined. Incorrect installation may
result in product damage or body injury. This product contains
small items that could be a choking hazard if swallowed.
Product Usage Instructions: 1. Before starting the
installation, carefully read the instruction manual. If you have
any doubts or concerns about the safety of the installation,
assembly, or use of this product, please contact us. 2. Ensure that
the wall where you plan to install the TV mount is made of wood
stud or solid concrete. Do not install into drywall alone. 3. Make
sure that the wall is capable of supporting five times the weight
of the TV and mount combined. Incorrect installation may result in
product damage or personal injury. 4. Before starting the assembly,
verify that all parts are included and undamaged. If any parts are
missing or damaged, do not return the damaged item to your dealer;
please contact our customer service team. Never use damaged parts.
5. Determine the desired location for the TV mount on the wall. 6.
Using a stud finder, locate the wood studs behind the wall or
identify a solid concrete area for installation. 7. Mark the
positions for drilling holes on the wall according to the product
dimensions provided. 8. Drill the necessary holes on the marked
positions, ensuring that the holes are of the appropriate size and
depth. 9. Attach the wall plate of the TV mount to the drilled
holes on the wall, using suitable screws or bolts. 10. Ensure that
the wall plate is securely attached to the wall and can support the
weight of the TV and mount. 11. Attach the TV brackets to the back
of your TV, following the manufacturer’s instructions for your
specific TV model. 12. Carefully lift and hang the TV onto the wall
plate, aligning the brackets with the corresponding slots or hooks
on the wall plate. 13. Double-check that the TV is securely mounted
and properly aligned. 14. If applicable, adjust the tilt of the TV
mount according to your desired viewing angle. 15. Once everything
is securely in place, test the stability of the TV by gently
nudging it to ensure it does not move or wobble. 16. Enjoy your
securely mounted TV! Note: These usage instructions are a general
guide. Please refer to the specific instructions provided with your
product for detailed steps and safety precautions.
INSTALLATION INSTRUCTION
Velcro Cable Ties ×3 Bubble Level ×1
Max: 99LBS (45KG)
Product Dimensions
Max: 600x400mm / 24×16″ Min: 75x75mm / 3×3″
YZ2226-US1
MAX: 600mm/24″ MIN: 75mm/3″
R4.3mm/0.17″ 30mm/1.18″
25mm/0.98″ 8.3mm/0.33″
Tilt
0°~-10°
42.5mm /1.67″
200mm 147.5mm 126mm /7.87″ /5.81″ /4.96″
406mm/16″ 457mm/18″ 508mm/20″
610mm/24″ 660mm/25.98″
MAX: 400mm/16″ 420mm
MIN: /16.54″
75mm/3″
Safety Caution
Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
This product is designed for use in wood stud or solid concrete wall. – DO NOT install into drywall alone.
The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!
Must Check Before Getting Started
MAX:600mm/24″
<16mm(5/8″)
Max. 24″(610mm)
Min. 8″ (203mm)
MAX: 400mm/16″
Max: 99LBS (45KG)
Drywall with wood studs Solid concrete wall
CAUTION: DO NOT install into drywall alone.
Extra Tools You Need (Not Supplied)
Supplied Parts and Hardware
Hardware
Lag Bolt M8x65mm
Wall Plate H ×1
Washer Ø8
Allen Key M4
A ×4
B ×4
C ×1
TV Screws / Spacers / Washers
Philips Screws M4 x 12mm M4 x 30mm
Philips Screws M6 x 15mm M6 x 30mm
Philips Screws M8 x 25mm M8 x 45mm
J ×1
Spacers L10mm
I ×1 TV Brackets
Washers Ø6mm M4-5-6
Spacers L5mm
For Wood Studs
For Concrete Wall
7/32″ (5.5mm)
Stud Awl Wood
Finder
Drill Bit
3/8″ (10mm)
Masonry Hammer Drill Bit
2M
Band Tape
Pencil
Electrodrill
1/2″ (13mm)
Socket Wrench
Screwdriver
1
STEP 1 Attach the TV Brackets
1-1 Select TV Screws
MA ×4
MB ×4
MC ×4
MD ×8
NOTE: Not all parts and hardware included will be used.
STEP 1 (Continued)
1-3 Attach the TV Brackets
ME ×4
MF ×8
2
M6 M8
M4
Too Short
Too Long Not Vertical
No!
Correct
Correct
1-2 Need Spacer?
Yes, choose the appropriate screws, washers,and spacers for your TV.
Long Screw
Washer
Bracket
Spacer TV back
01
02
03
04
Not for M8 Screws May be needed
TOP OF TV
For more spacing between bracket and TV
For raised back TV
For Counterbore of TV
To avoid the blocked input
No, just choose the screws, washers.
Bracket
Short Screw
Washer
3
TV back
4
5
STEP 2 Attach Wall Plate to Wall
OPTION A: Wood Stud Installation
A-1
24″(610mm) /16″(406mm)
Min. Wood Stud Size: nominal 2″(51mm)
actual 1 1/2″(38mm)
Center line
Min. Wood Stud Size: nominal 4″(102mm)
actual 3 1/2″(89mm)
Wall before Wood Stud <16mm(5/8″)
STEP 2 (Continued)
A-4
B A
CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
No!
Install wall plate using lag bolts and washer with Socket Wrench, NO Electrodrill.
CAUTION: Do not use in drywall or wood.
STEP 2 (Continued)
B-3
Concrete wall anchor (NOT INCLUDED)
10×61mm
Contact us to have these additional pieces shipped directly to you.
A-2
Bubble Level
A-3
7/32″ (5.5mm)
Wall plate
2.75″(70mm)
STEP 3 Adjustments
Be sure to drill into
the center of the stud.
6
Tilting adjustment (-10°~0°)
Pull brackets to your desired angle then fasten 2 titing bolts with Allen Key (G).
OPTION B: Solid Concrete Wall Installation
B-1
Bubble Level
Min. 8″ (203mm)
B-2
3/8″ (10mm)
2.75″(70mm)
Wall plate
DANGER
7
STEP 4 Hang and Secure TV to Wall Plate
4-1 Wall Plate Installation Integrity Test
Before hanging TV, please conduct “wall plate installation integrity test” firstly.
B-4
CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
No! Install wall plate using lag bolts, washer and anchor with Socket Wrench, NO Electrodrill.
8
Take down the TV from the Mount (If necessary)
0° -10°
4-2 Hang and Secure TV to Wall Plate
99 LBS (45KG)
Hang on top of Wall Plate
Pull down the straps
Push it back to restore default settings before re-hangingback.
Option:
To keep TV in vertical position, please use two M4 screws to insert the holes on two brackets respectively.
1
2
Lock to the bottom of the Wall Plate
1
2
9
TV must be hanged
up by two person
10
TV must be hanged
11
up by two person
