AH 2040 Lana Single Sconce Light
Product Information
Product Name: Lana Single Sconce
Item Number: AH 2040
Care Instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
Important Notice:
- This light fixture should be installed in accordance with all
applicable, local installation codes. - The installation should be done by a person familiar with the
construction and operation of the fixture, as well as the hazards
involved. - Inspect the item and its contents carefully. If any damage or
defect is found, do not install. - Retain all packaging material until installation is complete
and approved.
Product Usage Instructions
- Carefully remove all parts from the box.
- Remove the mounting plate (B) from the backplate (E) by
loosening the side screws (D). - Affix the mounting plate (B) onto the outlet box and secure it
with mounting screws (C). - Connect the hot wire (BLACK) from the fixture to the hot wire
from the power source.
Please ensure that you follow the instructions carefully to
ensure proper installation and safe usage of the Lana Single
Sconce.
ASSEMBLY INSTRUCTIONS
Lana Single Sconce
Item # AH 2040
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Remove the mounting plate (B) from the backplate (E) by loosening
the side screws (D). 3. Affix mounting plate (B) onto the outlet box and secure with mounting
screws (C). 4. Connect the hot wire (BLACK) from the fixture to the hot wire from the
outlet box(usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape. 5. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE). DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. 6. Connect ground wire from the fixture (bare copper) to ground wire from the outlet box(usually green or copper in color). IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. 7. Attach the fixture onto the mounting plate (B) and secure with side screws (D). 8. Insert bulb (not included) into the socket. 9. Clip the shade (F) to the bulb. 10. Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
