203-I, 213-F Rectangular Trampolines
Product Information
The product is a rectangular trampoline available in two models:
203-I and 213-F. The Model 203-I has a jumping mat of size 215×155
cm, while the Model 213-I has a jumping mat of size 275×190 cm.
Both models come with a safety pad, galvanized springs, L-tubes,
K-tubes, H-tubes, inground pins, and fasteners for safety pads.
Model 203-I has 44 galvanized springs of length 175mm and diameter
3.2mm, while Model 213-I has 46 galvanized springs of the same
length but a diameter of 3.8mm. Both models come with a tool for
spring and a users manual.
Product Usage Instructions
- Use a rubber hammer to assemble the trampoline.
- Attach the jumping mat to the frame using the galvanized
springs. - Attach the safety pad to the frame using the fasteners
provided. - Assemble the L-tubes, K-tubes, and H-tubes according to the
instructions provided. - Insert the inground pins into the ground and attach them to the
frame using the inground pin for safety pad. - Use the tool for spring to attach the springs to the jumping
mat and frame. - Refer to the users manual for additional instructions and
safety precautions. - For Model 203-I, use the provided tie rip to attach the warning
card to the trampoline. For Model 213-I, use the provided screw,
Allen key, and wrench to assemble the trampoline and attach the
closure for safety net. - For both models, the safety net can be attached using the poles
with sleeves and clamps provided. Refer to the instructions
provided for further details. - For any queries or assistance, contact the sales office at
[email protected] or visit www.avyna.eu.
Model 203-I 213-F
Rectangular trampolines
Assembly manual
Model 203-I
Jumping mat
Quantity Part number
Model 203-I
215×155 cm
1 TEPL-203-222
Galvanized spring L=175mm, 3.2mm
44 TEPL-200-211/C
Safety pad
TEPL-203-333-I-green or 1 AVGR-203-333-I-grey of
CAM-203-333-I-camouflage
Fastener for Safety pad 8 TEPL-ELAS-A
L-tube
2 TEPL-203-I-1131
L-tube
2 TEPL-203-I-1132
K-tube
2 TEPL-203-I-1141
K-tube
2 TEPL-203-I-1142
H-tube
2 TEPL-203-I-1151
H-tube
2 TEPL-203-I-1152
Inground pin
Quantity Part number
8 TEPL-PIN
Model 203-I
215×155 cm
Inground pin for safety pad
8
TEPL-SP-PIN
Tool for spring
1 TOOL-SPRING
Fastener for Safety pad 16 TEPL-ELAS-B
Users manual
1
Warning Card
1
Tie rip for warning card 1
Safety manual
1
208010101 208040101 209010102 208010301
1. 2.
3.
Rubber hammer!
4.
5. 6.
7. 8.
9.
TEPL-ELAS-B
1
2
1
TEPL-ELAS-B
TEPL-ELAS-A
10.
Model 213-I
Jumping mat
Quantity
Part number
Model 213-I
275×190 cm
1
TEPL-213-222
Galvanized spring L=175mm, 3.2mm Galvanized spring L=175mm, 3.8mm
Safety pad
Fastener for safety pad
46
TEPL-200-211/C
(red cap)
10
TEPL-200-211/C
(green cap)
TEPL-213-333-I-green
1
or
AVGR-213-333-I-grey
of
CAM-213-333-I-camouflage
8
TEPL-ELAS-A
K-tube
2
TEPL-213-I-1141
L-tube
2
TEPL-213-I-1142
Allen key
2
ALLEN KEY
Screw M6
4
090-M6-45
Screw M8
8
090-M8-60
Wrench M8
2
WRENCH M8
Fastener for safety pad 20
TEPL-ELAS-B
H-tube
Quantity Part number
Model 213-I
275 x 190 cm
2 TEPL-213-I-1151
H-tube
2 TEPL-213-I-1152
Inground pin
8 TEPL-PIN
Inground pin for safety pad 8 TEPL-SP-PIN
Tool for spring
1 TOOL-SPRING
I-tube
1 TEPL-213-I-1161
I-tube
1 TEPL-213-I-1162-A
I-tube
1 TEPL-213-I-1162-B
T-tube
2 TEPL-213-I-1171
Safety Manual Users Manual Warning Card
1 208010301 1 208010101 1 208040101
Tie rip for warning card 1 209010102
1.
T
T (1171)
T 4x
8x
2.
3. 4.
Model 213-i
60cm
5.
6. 7.
8.
5x(gr1ee7n5cmap)m, 3.8
8x 175mm, 3.2
(red cap)
5x(gr1ee7n5cmapm) , 3.8
9.
10.
TEPL-ELAS-A
TEPL-ELAS-B
2 1
1
TEPL-ELAS-B
11.
Model 203-I
Model 213-I
Pole with sleeve for safety net
Model 203-I
215×155 cm
Quantity Part number
4 AVBL-203-I-802 A
Pole for safety net
4 AVBL-203-I-802 B
Inground anker for pole safety net
Clamb for pole safety net
4 TOOL-203-SN 8 TEPL-KLEM
Plastic in between piece pole 4 safety net
TEPL-PLASTIC
Safety-net
1 ANBL-203-I
Straps for safety net Fastening for safety net Closure for safety net
TEPL-BAND 8 4x long: 1,5m(below)
4x short: 1,0m (above)
5 TEPL-ELASTIC
2 TEPL-KNOOP
Quantity Part number
Model 213-I
275×190
Pole with sleeve for safety net
8
AVBL-213-I-802 A
Pole for safety net
8
AVBL-213-I-802 B
Clamp
8
CLAMP-TOOL-SN-213-I
Straps for safety net
16
TEPL-BAND
Closure for safety net 2
TEPL-KNOOP
Safety net
1
ANBL-213-I
Screw M6 Screw M8 Allen key Wrench
8
M6-30
32
M8-20
2
ALLEN-KEY
2
WRENCH
1.
Model 213-I
2.
3.
4.
5.
Sales office: Beneluxbaan 7 5121 DC Rijen The Netherlands [email protected] www.avyna.eu
