Avyna 203-I Rectangular Trampolines
Product Information
The product is a rectangular trampoline available in two models: 203-I and 213-F. The 203-I model has a jumping mat with dimensions of 215×155 cm, while the 213-I model has a jumping mat with dimensions of 275×190 cm. Both models come with a galvanized spring, safety pad, L-tube, K-tube, H-tube, inground pin, tool for spring, users manual, warning card, tie rip for warning card, safety manual, and fasteners. Additionally, the 203-I model comes with a pole with sleeve for safety net and the 213-I model comes with eight poles with sleeves for safety net.
Product Usage Instructions
- Assemble the trampoline according to the assembly manual provided.
- Use the rubber hammer to secure the frame tubes together.
- Attach the jumping mat to the frame using the galvanized springs provided. Use the tool for spring to help with this process.
- Place the safety pad over the frame and secure it with the fasteners provided.
- Attach the L-tubes, K-tubes, and H-tubes to the frame according to the assembly manual.
- Insert the inground pins into the ground and attach them to the frame using the inground pin for safety pad.
- If you have the 203-I model, attach the pole with sleeve for safety net to each corner of the frame using the inground anchor and clamp provided. Then attach the plastic in-between piece pole for safety net.
- If you have the 213-I model, attach the eight poles with sleeves for safety net to each corner and side of the frame using the inground anchor and clamp provided. Then attach the plastic in-between piece pole for safety net.
- Attach the safety net to the poles using the straps and closure provided.
- Refer to the safety manual and warning card for important safety information.
Model 203-I
INSTRUCTIONS AND DIMENSION
Model 213-I
INSTRUCTIONS AND DIMENSION
Model 213-I
INSTRUCTIONS
Sales office: Beneluxbaan 7
5121 DC Rijen
The Netherlands
[email protected]
www.avyna.eu
trampoline.nl | Officiële website van Avyna
