MOUNT-V001G Pneumatic Arm Single Monitor Wall Mount
Product Information: Pneumatic Arm Single Monitor Wall
Mount
The Pneumatic Arm Single Monitor Wall Mount is a high-quality
product designed to securely mount your computer monitor to the
wall. It comes with all the necessary hardware for installation,
including screws, anchors, and washers, as well as a 5mm Allen
wrench for assembly. The mount can hold monitors weighing between
4.4-19.8lbs (2-9kg) and features an adjustable tension system to
hold your monitor in place.
Package Contents:
- A (x1) Monitor Arm
- W-A (x2) Wall Screw
- B (x2) Cover
- M-A (x4) M4x12mm Screw
- M-B (x4) M5x12mm Screw
- M-C (x4) M5 Washer
- W-B (x2) Anchor
- W-C (x2) Washer
- T-A (x1) 5mm Allen Wrench
Note: Not all hardware included will be used.
Tools Needed:
- Drill
- Phillips Screwdriver
CAUTION: Do not install into drywall alone. Verify your wall
construction. Use wood studs to mount. We include mounting for
brick and concrete walls. If unsure, please contact us at
[email protected], or call us at 309-278-5303.
Product Usage Instructions:
- Use a pencil to mark drilling location for wood beam and drill
2.2 deep holes using a 3/16 bit. Use of a stud finder is
recommended. Mount Arm (A) to wall using Wall Screws (W-A) and
Washers (W-C). Do NOT use Anchors (W-B) for wood beam
installation. - For concrete or brick wall installation, use a pencil to mark
drilling locations and drill (x2) 4 deep holes using a 3/8 bit.
Mount Arm (A) to wall using Screws (W-A), Anchors (W-B), Washers
(W-C). - Press Covers (B) into screw holes.
- Install Screws (M-A) or (M-B) with Washers (M-C) in top two
holes of the monitor, leaving 3mm of space between the screw heads
and the monitor. Tighten using the 5mm Allen Wrench (T-A). - Tighten the socket screw if the joints are making a popping
sound. Adjust arm tension by turning screw with 5mm Allen Wrench
(T-A). Turn clockwise to reduce tension and turn counterclockwise
to increase tension. The tension should be just enough to hold your
monitor in place without lifting itself up. If needed, adjust bolts
on the sides of the hinge behind the VESA plate to tighten or
loosen the tilt angle. Tighten using 5mm Allen Wrench (T-A). - Remove cable cover by removing the screw underneath each
one. - Insert cables and replace covers while making sure the cables
have enough slack to allow enough free movement of the arm. - Adjust as desired.
If any parts are received damaged or defective, please contact
the support team at [email protected], or call at 309-278-5303.
Pneumatic Arm Single Monitor Wall Mount
Instruction Manual
SKU: MOUNT-V001G,W
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-v001g
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
PACKAGE CONTENTS
A (x1) Monitor Arm
W-A (x2) Wall Screw
B (x2) Cover
M-A (x4) M4x12mm
Screw
M-B (x4) M5x12mm
Screw
M-C (x4) M5 Washer
W-B (x2) Anchor
W-C (x2) Washer
T-A (x1) 5mm Allen Wrench
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us. com, email at [email protected], or call us at 309-278-5303.
TOOLS NEEDED
Drill
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY. 4.4-19.8lbs
Failure to do so may result in serious injury.
(2-9kg)
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
2
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall Use a pencil to mark drilling location for wood beam and drill 2.2″ deep holes using 3/16″bit. Use of a stud finder is recommended. Mount Arm (A) to wall using Wall Screws (W-A) and Washers (W-C). Do NOT use Anchors (W-B) for wood beam installation.
OPTION B: Concrete/Brick Wall For concrete or brick wall installation, use a pencil to mark drilling locations and drill (x2) 4″ deep holes using a 3/8″ bit. Mount Arm (A) to wall using Screws (W-A), Anchors (W-B), Washers (W-C).
3
STEP 2
Press Covers (B) into screw holes.
STEP 3
Install Screws (M-A) or (M-B) with Washers (M-C) in top two holes of the monitor, leaving 3mm of space between the screw heads and the monitor. Tighten using the 5mm Allen Wrench (T-A).
T-A
T-A T-A
4
STEP 4
Tighten the socket screw if the joints are making a popping sound. Adjust arm tension by turning screw with 5mm Allen Wrench (T-A). Turn clockwise to reduce tension and turn counterclockwise to increase tension. The tension should be just enough to hold your monitor In place without lifting itself up. If needed, adjust bolts on the sides of the hinge behind the VESA plate to tighten or loosen the tilt angle. Tighten using 5mm Allen Wrench (T-A).
T-A T-A
STEP 5
Remove cable cover by removing the screw underneath each one.
T-A T-A
5
STEP 6
Insert cables and replace covers while making sure the cables have enough slack to allow enough free movement of the arm.
T-A T-A
6
Adjust as Desired
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 12/22/2022 REV2.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
[email protected]
www.vivo-us.com
Chat live with an agent!
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Pneumatic Arm Single Monitor Wall Mount – VIVO - desk solutions, screen mounting, and more
