RTA-S07 Rolling Storage and File Cabinet
Rolling Storage and File Cabinet – Model RTA-S07
The Rolling Storage and File Cabinet is a versatile storage unit
designed for both home and office use. It is equipped with four
drawers, including a file drawer, and locking casters for easy
mobility. The cabinet is made of high-quality materials and comes
with hardware required for assembly.
Assembly Instructions
Before starting the assembly, please scan the QR code to view
the full assembly video. Make sure to do a quick inventory of all
the parts and hardware listed in the manual. If any part is
missing, damaged, or defective, you can get a replacement at no
cost. Refer to the last pages of the manual for instructions on
replacement parts.
The assembly steps are shown in the manual. The cabinet uses cam
bolts and locks for assembly, which are explained in detail in the
tutorial provided in the manual. Make sure to follow the exact
order and sequence of assembly steps as shown in the manual.
The hardware list and included tools are provided in the manual.
You will need a Phillips screwdriver and a hex wrench (spanner) to
assemble the cabinet. The cabinet is designed for use in the 48
contiguous United States. If you reside in AK, HI, PR, U.S.
territories or other countries, please contact the supplier from
where the unit was purchased.
Product Usage Instructions
The Rolling Storage and File Cabinet is a versatile storage unit
that can be used for multiple purposes. Here are some usage
instructions:
- The cabinet has four drawers, including a file drawer, that
provide ample storage space for documents, files, and other
items. - The locking casters make it easy to move the cabinet around as
needed. - The cabinet is made of high-quality materials and is designed
to last for years with proper use and maintenance. - Make sure to keep the cabinet clean and free of dust and
debris. Use a soft, damp cloth to wipe down the surface of the
cabinet. - Avoid placing heavy items on top of the cabinet as it may
damage the surface or cause it to tip over. - The file drawer is designed to accommodate standard size files.
Make sure to organize your files properly to avoid clutter and
confusion. - Make sure to lock the cabinet when not in use to ensure the
safety of your documents and other items stored inside.
ROLLING STORAGE AND FILE CABINET
MODEL RTA-S07
ASSEMBLY INSTRUCTIONS
Thank you for purchasing our product
Scan QR to view full assembly video
REV.OL-6983-1022
P.1
RTA-S07
· Do not discard this manual or any of the packaging material until the unit has been completely assembled.
· Please read carefully the assembly instructions before the installation.
· Scan this QR code to view the complete assembly video online.
P.1
· For individual Step videos – please use the QR code found on the corresponding step within the manual.
· After the item is assembled, you can use rubbing alcohol to erase or remove the visible part numbers printed or labeled on the pieces.
· Please be kind to our planet, when done with the assembly, recycle any of the packaging materials that is accepted by your city or recycling service.
SAMPLE – DO NOT SCAN Thank you!
P.2
RTA-S07
P.2
Do a quick inventory of all the parts and hardware listed below
Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual.
The replacement parts service is limited to the 48 contiguous United States. If you reside in AK, HI, PR, U.S. territories or other countries, please contact the supplier from where the unit was purchased.
1 Small drawer left
x2 panel
MAIN PARTS LIST
2 Small drawer right 3L Locking caster
x2 panel
x2
3N Non-Locking
x2 caster
4 Top drawer front
x1 panel
5 Drawer bottom
x3 board
6 Small drawer back 7 File drawer left
x2 panel
x1 panel
8 File drawer right
x1 panel
13.5″
12.75″
9 File drawer front
x1 panel
10 File drawer back
x1 panel
11 File tubes, SET of
x1 2 pcs Set
12 Drawer metal sliders, SET of 4 pcs
x3 Set
13 Handle
x3
14 Left side panel
x1
“FLAT”: 2 pcs per set, go inside the cabinet
“L shape”: 2 pcs per set,
go on the drawers
15 Right side panel
x1
16 Bottom panel
17 Back board
x1
x1
17.5″
18 Top panel
x1
15″
P.3
19 Bracket and nut
x1 set
RTA-S07
20 File drawer wheel
x1
P.3
21 Middle drawer front panel
x1
22A Locking fit piece A,
x1 SET of 2 pieces set
22B Locking fit piece B,
x1 SET of 3 pieces set
22C Locking fit piece C,
x1 SET of 3 pieces set
22D Lock and 2 matching
x1 keys set
22E Metal locking bar
x1
22F Tiny screws for 22C,
x1 SET of 3 pcs set
19.75″
22G Ring for the lock 22D
x1
MAIN PARTS LAYOUT (For reference)
HARDWARE LIST AND INCLUDED TOOLS
PART QTY
A 20 B 12 C 40 D6 E 18 F1
SIZE M6x40 Bolt
M4x35 M3x15 M4x20 M4x14 M6x12
ITEM
INCLUDED TOOLS
1 Phillips Screwdriver 1 Hex wrench (spanner)
P.4
RTA-S07
P.4
CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS
This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial
that explains how to use them on the steps where they are required.
1. Screw the bolt into the indicated hole on the panel indicated in the assembly step.
2. Join the other panel (with the big hole) to the panel with the bolt. If it comes with the cam locks already pre-installed, make sure to align them to receive the bolt’s head (refer to point 3). There might be a very small gap between the panels which is normal.
If the cam locks come pre-in stalled, make sure they are aligned (see point 3).
3. Insert the cam lock on the panel with the big hole making sure it goes aligned to receive the bolt’s head.
Cam lock alignment
4. Use a Phillips screwdriver to turn the cam lock clockwise. This will lock the panels togheter and also will close any gaps.
P.5
RTA-S07
P.5
BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.
· Do not discard this manual or any of the packaging material until the unit has been completely assembled.
· If during assembly you find an issue or need clarification, please contact our Customer Service for assistance. Please refer to the last pages on this manual.
· On each step read the instructions thoroughly and analyze the illustrations before proceeding to do the assembly.
· Follow the instructions step by step and do not skip any unless our Customer Service advises it is OK to do so.
· Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
30mm
M6x30
M6
· To avoid misalignments, always leave the screws loose and tighten them until all pieces are positioned correctly.
· Do not overtighten or force the screws as they might break, strip, damage the threads of the holes or get stuck inside the part.
· If the hole seems too small for the screw, make sure you are using the correct size of screw and/or that you are installing it in the correct hole.
· Sometimes on the panels the laminate or material might be covering the hole partially or entirely. If there is no visible hole or it seems too small, pass and press the tip of your finger over the area where the hole should be located to feel its indentation, and once found, carefully pierce the laminate to uncover the hole underneath.
P.6
STEP 1 Tools (included)
Scan QR to view step
RTA-S07
P.6
ASSEMBLY STEPS
INSERT THE PIECES IN THE EXACT ORDER SHOWN
Slide one piece of the locking fitting 22A through the metal bar 22E with its flat side UP. Slide all 3 pieces of the locking fitting 22C facing UP, align each piece within the markings on the bar, and insert and tighten the tiny screws 22F to lock the pieces on the bar. Slide the second piece 22A through the metal bar 22E with its flat side UP.
FIRST:
THEN:
THEN:
STEP 2 Hardware
C
8 M3x15 Pcs
Tools (included)
Place the locking system 22 inside the big channel of the right side panel 15 with the 2 rods facing UP and toward the TOP, and secure the fittings 22A with screws C as shown.
22
Scan QR to view step
(Front)
(Top)
(Front)
(Top)
P.7
RTA-S07
P.7
STEP 3
Scan QR to view step
Grab all the 3 sets of sliders 12 and separate them into 2 groups according to their shape:
The “flat” ones will be used on the next step. The “L” shaped will be used until step 17, set them aside.
12 “Flat”
RIGHT LEFT
(Front)
The “flat” ones will be used on the next step.
12 “L” Shaped
RIGHT LEFT
(Front)
The “L” shaped will be used until step 17, set them aside.
STEP 4 Hardware
C
12 M3x15 Pcs
Tools (included)
Scan QR to view step
Assemble the “Flat” sliders 12 to the 3 sets of holes on the side panels 14 and 15 with screws C. Please note:
The wheel goes facing towards the front, and faces down with 2 holes above it. The sliders attach at the front on the 2nd hole. The sliders will be flushed with the front edge of the panels. The narrow grooves on the panels are located at the back.
(Front)
12 Left
12 Right
(Front)
(Top)
(Top)
(Front)
(Front)
14
2nd hole from front
And wheel facing down
15
2nd hole from front
And wheel facing down
P.8
RTA-S07
P.8
STEP 5 Hardware
A
20 M6x40 Bolt Pcs
Tools (included)
Attach the bolts A to the indicated holes on panels 4, 9, 14, 15, 18 and 21.
Scan QR to view step
4
21
9
(Top)
(Top)
(Top)
18
(Front)
STEP 6 Hardware
E
16 M4x14 Pcs
Tools (included)
Use screws E to attach the Locking casters 3L to the bottom surface of the bottom panel 16 at the front, and the non-locking casters 3N at the back.
Scan QR to view step
(Back)
(Front)
P.9
RTA-S07
P.9
STEP 7 Tools (included)
Scan QR to view step
On the bottom panel 16, first make sure that the cam locks are properly aligned to receive the bolts. Join the side panels 14 and 15 to panel 16, and turn the cam locks to lock all the pieces together as explained in page 4.
Cam locks alignment on 16
(Front)
(Top) (Top)
(Front)
15
(Front)
14
16
STEP 8 Tools (included)
Scan QR to view step
Slide the back board 17 through the grooves of panels 14 and 15 and into the groove of panel 16 Assemble the top panel 18 to panels 14 and 15 as explained in page 4.
Cam locks
alignment
on 14, 15
18
17
(Front)
14
15
16
14
15
P.10
RTA-S07
P.10
STEP 9 Hardware
C
6 M3x15 Pcs
Tools (included)
Attach the metal fittings 22B to each of the small drawers’ right panels 2 and to the file drawer’s right panel 8 with screws C. NOTE: The “U” on the fitting must face DOWN.
Scan QR to view step
22B C
2
(Top)
(Front)
2
(Top)
(Front)
8
(Top)
(Front)
STEP 10 Hardware
E
2 M4x14 Pcs
F
1 M6x12 Pc
Tools (included)
Scan QR to view step
Assemble the bracket 19 to the bottom holes on the file drawer front panel 9 with screws E and F. Attach the wheel 20 to the bracket 19 with the nut 19.
F
E
E
(Bottom)
9
(Top)
19 20
19
STEP 11
Scan QR to view step
Assemble the small drawer side panels 1 and 2 to the top drawer front panel 4 and also to the middle drawer front panel 21 in their respective sides and as explained in page 4. Assemble the file drawer side panels 7 and 8 to the file drawer front panel 9 in their respective sides and as explained in page 4.
Tools (included)
1
(Left)
2
(Right)
1
(Left)
2
(Right)
Cam locks alignment on 1, 2, 7 and 8
(Left)
7
(Right)
8
(Top)
4
(Top)
21
9
(Top)
P.11
STEP 12
Scan QR to view step
RTA-S07
P.11
Slide the drawer bottom board 5 through the grooves of the side panels on all 3 drawers, and into the groove of the front panels respectivelly, as shown.
5 2
1
4
5 2
1 21
5 8
7 9
STEP 13
Hardware
B
12 M4x35 Pcs
Tools (included)
On the two small drawers, assemble the back panel 6 to the side panels 1 and 2 with screws B as shown. On the file drawer, assemble the back panel 10 to the side panels 7 and 8 with screws B as shown.
Scan QR to view step
6 2
1
6 1
10
2
8
7
STEP 14 Hardware
D
6 M4x20 Pcs
Tools (included)
Attach the handles 13 to the front panels on all 3 drawers with screws D.
13
9
Scan QR to view step
4 13
21 13
P.12
RTA-S07
P.12
STEP 15
Scan QR to view step
For the file drawer, insert the file tubes 11 through the holes on the back panel 10 and screw them into the front panel 9, but DO NOT OVERTIGHTEN to avoid accidental damage humps or perforation. Please note that such kind of damage is not covered by the product’s warranty.
Sets of holes to use for the file tubes:
To use with Letter folders (North America):
To use with A4 folders (International):
DO NOT OVERTIGHTEN! To avoid accidental humps or perforation.
9
11
10
11
STEP 16 Hardware
C
2 M3x15 Pcs
Tools (included)
Scan QR to view step
For the small top drawer with lock, attach the lock 22D from inside of panel 4 with screws C, but make sure that the keys will make the rod rotate from the bottom to the top in a counter-clock motion. Attach the ring 22G to the lock 22D at the front.
The rod MUST rotate from bottom to top counter-clockwise. If it does not, remove, rotate 180° and re-attach.
Installing with the lock turning the wrong way will make it stuck with the drawer locked, unable to open.
22G 4
22D
P.13
RTA-S07
P.13
STEP 17 Hardware
C
12 M3x15 Pcs
Tools (included)
With all the drawers upside-down, attach to them the “L” shaped sets of sliders 12 with screws C. Please note that the wheels go facing towards the back of the drawers, and they should not protrude, otherwise, the drawers rise 1″ and won’t fit in the cabinet.
Scan QR to view step
12 (Front)
When finished, the sliders look like this:
(Top)
If you install as below, the drawers raise 1″ and won’t fit in the unit.
Sliders
(Bottom)
Sliders
Left
Right
Right
Left
Left
Right
STEP 18
Scan QR to view step
Insert the bottom and the middle drawer into the cabinet, at an angle facing down. Make sure the wheels from the drawers slide in the middle of the sliders inside the cabinet, not on top of them. Before you insert the top drawer, make sure the lock turns from bottom to top in counter-clockwise motion, and if it doesn’t, review step 16 for the correct assembly of the lock. AN INCORRECT ASSEMBLY OF THE LOCK MIGHT LEAD TO THE TOP DRAWER GETTING STUCK AND LOCKED, UNABLE TO OPEN. Insert the top drawer into the cabinet at an angle facing down. If it does not enter and hits the top of the cabinet, review the assembly done in steps 1, 2, 4, 9, 16 and 17 for the correct as. sembly of the locking fittings and sliders.
Inside the drawer, the rod on the lock must face DOWN
And the key must turn counter-clockwise
P.14
RTA-S07
P.14
ALL DONE!
Give yourself a nice pat on the back, you did a great job!
ENJOY YOUR NEW UNIT!
TROUBLESHOOTING THE LOCK SYSTEM
If the item does not want to lock, review the assembly done in pages 6, 7, 10, 12 and 17 for the correct assembly of the locking fittings and the drawer sliders. The middle and bottom drawers will lock only if they are closed completely. If the keys are lost but the cabinet is unlock, replace them with a new set of lock and keys. If the cabinet is locked, and the keys are lost or don’t want to turn, please contact our Support Department to receive instructions for solving this problem.
P.15
RTA-S07
WEIGHT LIMITS
66 Lbs (27.3 Kg)
22 Lbs (10 Kg)
P.15
WARNINGS
Do not exceed the indicated weight limits. Do not expose the surfaces to direct sunlight or to extreme environmental conditions. Do not use solvents or abrasive materials to clean the unit. Do not sit on the unit or lean against it. Do not allow small children to climb over the unit. Keep the item locked if there are small children around. Before moving the unit, make sure to unlock the front wheels, and secure or remove any object that is on the top panel that might fall off.
CARE AND MAINTENANCE
Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel. If you decide to use a cleaning agent, test first on an area hidden from view such as underneath one of the drawers. Every 4 months, inspect the unit completely and make sure that all screws are tighten. When transporting the unit to places far away, protect and secure the unit to avoid damage in transit. Shall any part of the unit become defective during the warranty period, replacement parts might be available to you at no charge. Please refer to the last pages on this manual. The warranty does not extend to regular wear and tear, nor the manufacturer assumes liability for damages or consequences due to accidents, incorrect assembly, negligence, improper use, modifications, or not heeding the above warnings.
P.16
RTA-S07
TECHNI MOBILI WARRANTY
P.16
DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY
RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. “Defects” as used in this warranty, is defined as any imperfections that impair the use of the furniture or product. RTA Products LLC will replace any defective part, at its discretion, and without charge to the original purchaser other than the freight from the end consumer to RTA Products.
Replacement parts can only be supplied if parts are available. Items out of production may be unavailable. This warranty will be effective for the applicable time period beginning the date of purchase on your original sales receipt. RTA product’s obligation under this warranty is limited to repairing or replacing products or parts as provided herein. This product has been designed for and is intended for office and home-office use only. This warranty is Original Purchaser’s sole remedy for product defects, and this warranty does not extend to any product, or damage to any product, caused by or attributed to abuse or misuse, products used for commercial or rental purposes, use modifications of, or attachments to the product, and products or parts not used, maintained, or extended hereunder is in lieu of any and all other warranties, express or implied, including without limitations any implied warranty or merchantability or of fitness for a particular purpose. Please note, all desks made with PVC Laminate surface should not be exposed to direct sunlight, as it may damage the material. Damage of this nature is not covered under this warranty.
RTA Products will not be responsible for indirect, special, incidental or consequential damages. This warranty is limited to merchandise purchased in the Continental United States, excludes AK, HI and PR. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights that may vary from state to state.
RTA Products will advise you of the procedure to follow in making warranty claims. The following are the procedures for warranty claims: a. Call us Monday Friday, from 9am-5pm (Eastern Time) at (866) 782-5520 to explain the defect and give your name, address and phone number. Please have ready the model number of our product, date and place of purchase. You can also write to us by e-mail to [email protected] and include the same information. b. If we determine that replacement will remedy the situation, and in order to determine the extent or the cause of the defect, purchaser will need to send the part in question at purchaser’s expense. Once we receive the part, we will examine it and determine whether the claim is valid (or not), and then proceed to send the replacement. We will ship the replacement at our expense.
FOR SEVERAL HELP OPTIONS
INCLUDING REPLACEMENT PARTS ORDERS
VISIT: WWW.TECHNIMOBILI.COM AND CLICK ON SUPPORT TAB
Or scan the following QR Code:
Scan the following QR Code to order replacement parts:
EMAIL US:
[email protected]
Techni Mobili Home and Office Furniture
