PARTS/TOOLS NEEDED
INSTALLATION CONSIDERATIONS
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Drill a 3/4” hole (or 1” if using the decorative collar) in your mounting surface. To prevent damage to the wires install a wire grommet.
- Wire the light based on the wiring diagram. Feed wires back into the hole and push the light in place. Use silicone sealant to hold it in place.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00036 • Rev C • 04/07/20
ITC Warranty & Return Policy
