3413 GPIO Hammer Headers Solderless Raspberry Pi Connectors
Product Information: GPIO Hammer Headers – Solderless Raspberry
Pi Connectors
The GPIO Hammer Headers are solderless connectors designed for
Raspberry Pi. This product includes both male and female
connectors, as well as an installation jig. The product ID is 3413
and it is currently in stock.
Description
The GPIO Hammer Headers allow for easy and secure connection of
GPIO pins on your Raspberry Pi. With these connectors, you can
quickly and conveniently attach various components and parts to
your Raspberry Pi board without the need for soldering.
Product Usage Instructions
- Start by ensuring your Raspberry Pi is powered off and
disconnected from any power source. - Place the installation jig over the GPIO pins on your Raspberry
Pi board, aligning the holes with the pins. - Take the male connector and insert it into one end of the
installation jig, ensuring each pin goes through its corresponding
hole. - Gently tap the male connector with a hammer or mallet to secure
it in place. Ensure that each pin is properly seated and aligned
with the corresponding GPIO pin on your Raspberry Pi. - Repeat steps 3 and 4 for the female connector, inserting it
into the other end of the installation jig. - Once both connectors are securely in place, remove the
installation jig from the GPIO pins. - Your Raspberry Pi is now ready for use with the solderless GPIO
Hammer Headers. You can connect various components and parts to the
male and female connectors as needed.
Note: Ensure that you handle the connectors and your Raspberry
Pi board with care during the installation process to avoid any
damage.
For more information and support, please contact our customer
support team or refer to the user manual.
Sign In 0 Items
SHOP
BLOG
LEARN
FORUMS
VIDEOS
COMPONENTS & PARTS / HEADERS / GPIO HAMMER HEADERS – SOLDERLESS RASPBERRY PI CONNECTORS
GPIO Hammer Headers – Solderless Raspberry Pi Connectors – Male + Female + Installation Jig
PRODUCT ID: 3413
IN STOCK
1
ADD TO CART
ADD TO WISHLIST
DESCRIPTION LEARN
DESCRIPTION
If your soldering isn’t quite up to scratch, or you just don’t own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Absolutely no soldering required! All that’s needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT. The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two nylon bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read Pimoroni’s guide for fitting hammer headers. We strongly recommend using the installation jig! If you want to try without it then godspeed to you, but it’s a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig. Please note: Hammer at your own risk! We can’t be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow Pimoroni’s guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead! Note: Pi Zero not included!
Bilge Tank 072 – STOP! HAMMER TIME!
Downloaded from Arrow.com.
New Products 3/29/2017
LEARN
Haunted Portrait Make a spooky digital portrait come to life with a Raspberry Pi Zero image player
MAY WE ALSO SUGGEST…
Break-away 0.1″ 2×20-pin Strip Dual Male Header
2×40 Right Angle Edge Connector for micro:bit
GPIO Header for Raspberry Pi HAT – 2×20 Short Female
Adafruit Pi T-Cobbler Plus Kit Breakout for 2×20
GPIO Ribbon Cable for Raspberry Pi Model
IDC Breakout Helper – 2×20 (40 pin)
2×20 pin IDC Box Header Raspberry Pi A+/B+/Pi 2/Pi 3
SMT GPIO Header for Raspberry Pi HAT – 2×20
Downloaded from Arrow.com.
Assembled Pi T-Cobbler Plus – GPIO Breakout
Pibow Zero W Case for Raspberry Pi Zero W
Pimoroni Four Letter pHAT for Raspberry Pi Zero
Hammer Header Female Solderless Raspberry Pi
DISTRIBUTORS EXPAND TO SEE DISTRIBUTORS
CONTACT SUPPORT DISTRIBUTORS EDUCATORS JOBS FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL ABOUT US
ENGINEERED IN NYC Adafruit ®
4.9
Downloaded from Arrow.com.
