Congratulations on your purchase of the AGT Industrial 4 IN 1
Bucket! This product has been designed and manufactured to provide
you with dependable service for years to come. Proper maintenance
is required to keep it in top working condition. Please read and
observe all safety precautions and maintenance procedures as
described in this manual.

Before Operation

Thoroughly read and understand the instructions given in this
manual before operation. Refer to the Safety Label section and read
all instructions noted on them. Do not allow anyone to operate this
equipment who has not fully read and comprehended this manual and
who has not been properly trained in the safe operation of the
equipment.

Service

Please remember to use only manufacturer replacement parts.
Substitute parts may not meet the standards required for safe,
dependable operation.

Safety Precautions

Before Operation

Operator should be familiar with all functions of the
unit.
Make sure all guards and shields are in place and secured
before operating implement.
Keep all persons away from equipment and work area.
Dismounting from a moving unit can cause serious injury or
death.
Keep hands, feet, and clothing away from power-driven
parts.
Detach and store implement in an area where children normally
do not play. Secure implement by using blocks and supports.
Always wear proper safety glasses, goggles, or a face shield
when driving pins in or out, or when any operation causes dust,
flying debris, or any other hazardous material.

Operator Safety

Wear protective clothing and equipment appropriate for the job.
Clothing should be snug fitting without fringes and pull strings to
avoid entanglement with moving parts.
Prolonged exposure to loud noise can cause hearing impairment
or hearing loss. Wear suitable hearing protection such as earmuffs
or earplugs.
Operating equipment safely requires the operator’s full
attention. Avoid wearing radio headphones while operating
machinery.

Tool Safety

Inspect entire machine before each use. Replace damaged or worn
parts.
Check for fuel leaks and make sure all fasteners are in place
and securely fastened.

Wear Protective Equipment

Transportation and Storing

Store machine and fuel where fuel vapors cannot reach sources
of combustion like water heaters, electric motors, switches,
furnaces, etc.
Always secure the machine with tie downs or similar restraints
when transporting.
The machine should be stored in a manner that prevents it from
falling, rolling, or tipping.

Bucket Assembles

S/N	Part No.	Part Description
1	Bucket Weldment	1
2	Frame Weldment	1
3	Pin Bearing Weldment 1	2
4	Pin Bearing Weldment 2	2
5	Pin Bearing Weldment 3	2
6	Bucket Plate	1
7	Bucket Bracket	1
8	Nozzle 405030	4
9	Hex Bolt M12*40	16
10	Ring 12	16
11	Lock Washer 12 Galvanized	16
12	Common Nut M12	16
13	Lock Washer 10 Galvanized	6

Operation Instructions

Please refer to the manufacturer’s instructions for specific
operation instructions for the AGT Industrial 4 IN 1 Bucket.

Notes

Please refer to the manufacturer’s instructions for additional
notes and information for the AGT Industrial 4 IN 1 Bucket.

View Fullscreen

AGT INDUSTRIAL
PRODUCT MANUAL
4 IN 1 Bucket Model:AGT-4IN1BCT

Ver.1.1.3

TABLE OF CONTENTS

2/9

TO THE OWNERS

3/9

SAFETY PRECAUTIONS

4/9

ROTOTILLER ASSEMBLES

7/9

PERATION INSTRUCTIONS

8/9

NOTES

9/9

TO THE OWNERS
GENERAL COMMENTS
Congratulations for having this 4 IN 1 Bucket! Your 4 IN 1 Bucket was carefully designed and manufactured to give you years of dependable service. Your 4 IN 1 Bucket will require some minor maintenance to keep it in top working condition. Please observe all safety precautions and maintenance procedures as described in this manual.
BEFORE OPERATION
Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them. Do not allow anyone to operate his equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.
SERVICE
Please remember to use only manufacturer replacement parts. Substitute parts may not meet the standards required for safe, dependable operation.
P3

SAFETY PRECAUTIONS
BEFORE OPERATION
1. The operator must read the operation manual carefully before installation, operation or maintenance. Improper operation will cause the machine damage or the operator death. 2. Read all the safe signs and safe declarations. Follow all the professional safe terms, local laws or the professional directions. 3. Familiar with the 4 IN 1 Bucket about functions, specs and operation. Replace the to-be-damaged parts in time. Make sure all the hydraulic installations and couplings connect firmly, and all the safe signs stick on the suitable positions clearly.
IMPORTANT
1. Operator should be familiar with all functions of the unit. 2. Make sure all guards and shields are in place and secured before operating implement. 3. Keep all persons away from equipment and work area. 4. Dismounting from a moving unit can cause serious injury or death. 5. Keep hands, feet, and clothing away from power-driven parts. 6. Detach and store implement in an area where children normally do not play. Secure implement by using blocks and supports.
Always wear proper safety glasses, goggles, or a face shield when driving pins in or out, or when any operation causes dust, flying debris, or any other hazardous material.
P4

SAFETY PRECAUTIONS
Operator Safety
Wear protective clothing and equipment appropriate for the job. Clothing should be snug fitting without fringes and pull strings to avoid entanglement with moving parts. Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable hearing protection such as earmuffs or earplugs. Operating equipment safely requires the operators all attention, Avoid wearing radio headphones while operating machinery.
Tool Safety
Inspect entire machine before each use. Replace damaged or worn parts. Check for fuel leaks and make sure all fasteners are in place and securely fastened.
P5

SAFETY PRECAUTIONS
Wear Protective Equipment
Escaping fluid under pressure can penetrate the skin causing serious injury. Avoid the hazard by relieving pressure before disconnecting hydraulic lines or performing work on the system. Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before applying pressure to the system. Use a piece of paper or cardboard, NOT BODY PARTS to check for suspected leaks. Wear protective gloves and safety glasses or goggles when working with hydraulic systems. DO NOT DELAY. If an accident occurs, see a doctor familiar with this type of injury immediately. Any fluid injected into the skin or eyes must be treated within a few hours or gangrene may result.
Transportation and Storing
Store machine and fuel where fuel vapors cannot reach sour combustion like, water heaters, electric motors, switches, furnaces, etc. Always secure the machine with tie downs or similar restraints when transporting. The machine be stored in a manner that prevents it from falling, rolling or tipping.
P6

BUCKET ASSEMBLES

S/N

PART NO.

PART DESCRIPTION

QTYS

NOTE

Bucket Weldment

Frame Weldment

Pin Bearing Weldment 1

Pin Bearing Weldment 2

Pin Bearing Weldment 3

Bucket Plate

Bucket Bracket

Nozzle 40*50*30

Hex Bolt M12*40

Ring 12

Lock Washer 12Galvanized 16

Common Nut M12

Lock Washer 10Galvanized 6

Bolt M10*25Galvanized

Ring10

Grease Fittiing M10*1

4IN1 Bucket Cylinder

P789

OPERATION INSTRUCTIONS
Never run the skid steer engine in a closed building without adequate ventilation, as the exhaust fumes are very dangerous.
1. Always make sure all 4N1 bucket components are properly installed and securely fastened BEFORE operation. 2. Always start the engine from the operator’s seat with all the transmission lever(s) and 4N1 bucket drive lever (if applicable) in neutral. 3. DO NOT bypass the safety system by shorting across the terminals of the starter motor to start the engine. This may cause the skid steer to move suddenly. 4. If the safety start system does not work, consult your dealer immediately. 5. DO NOT use the 4N1 bucket near the edge of drop-offs or banks. 6. DO NOT use the 4N1 bucket on steep slopes as overturn may result. 7. Operate up and down (not across) intermediate slopes. Avoid sudden starts and stops. 8. Drive skid steer backwards up steeper slopes. 9. Slow down before you change directions on any slope. 10. Use wheel weights on your skid steer to increase stability on slopes. 11. Make sure the skid steer is counterweighted as recommended by your dealer. Weights provide the necessary balance to improve stability, traction and steering. 12. Be especially observant of the operating area and terrain. Watch for holes, rocks, or other hidden hazards. ALWAYS inspect the area prior to using the 4N1 bucket. 13. Keep the parking brake on at all times during transportation. 14. Always drive at a safe speed relative to local conditions and ensure that your speed is low enough for an emergency stop to be safe and secure. 15. Always keep the skid steer in gear to provide engine braking when going downhill. Do not coast. 16. Park the skid steer/4N1 bucket on level ground, place the transmission in neutral, set the parking brake, disengage the Aux hydraulics, lower the equipment to the ground, place all levers including auxiliary control levers in neutral, shut off the engine and remove the ignition key BEFORE leaving the skid steer.
P8