JYL7590A LED Linear Pendant Light
Product Information
- Model Number: JYL7590A
- Product Dimensions: 36L X 9.75W X 24-96H
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | mounting screw | 2X | |
| H | closable Link | 4X | |
| B | mounting plate | 1X | |
| I | chain | 2X | |
| C | machine screw | 2X | |
| J | body | 1X | |
| D | ground screw | 1X | |
| K | glass shade | 3X | |
| E | wire connector | 3X | |
| L | socket ring | 3X | |
| F | canopy | 1X | |
| M | bulb | 3X | |
| G | screwed ball | 2X |
Product Usage Instructions
Preparation
Before beginning assembly of the product, make sure all parts
are present. Compare parts with the package contents list and
hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product. Estimated assembly time: 20
minutes.
- Thread mounting screws (A) into the matching holes of the
mounting plate (B), then fix the mounting plate (B) to the outlet
box with machine screw (C). - Connect chain (I) by looping it through the body (J) and the
canopy (F) using the closable link (H). - Make wire connections using wire connectors (E) according to
the reference chart listed below:
| Connect | Hot, Black or Red Outlet Supply Wire to: |
|---|---|
| Black | Parallel Cord (round & smooth) |
| Clear, Brown, Gold or Black without Tracer stripes | (colored Parallel Cord) |
| Connect | Neutral, White Outlet Supply Wire to: |
| White | Parallel Cord (square & ridged) |
| Clear, Brown, Gold or Black with Tracer (colored stripes) | Insulated Wire (not green) with copper metal conductor |
| Insulated Wire (not green) with Silver metal conductor |
Note: When parallel wire (SPT I & SPT II) is used, the
neutral wire is square shaped and ridged, and the hot wire will be
round in shape and smooth.
Grounding Instructions:
- For installation in the United States: Wrap the ground wire
from the outlet box around the green ground screw (D) on the
mounting plate, no less than 2 inches from the wire end. Tighten
the ground screw. If the fixture is supplied with a ground wire,
connect it to the outlet ground wire using a wire connector. - For installation in Canada: If the fixture is supplied with a
ground wire, wrap the ground wire around the green grounding screw
on the mounting plate. Tighten the ground screw.
- Orient the ceiling canopy (F) so that the mounting screws (A)
protruding from the mounting plate (B) go into the holes in the
canopy (F), then secure it with the provided screwed balls
(G). - Put the glass shade (K) on the socket, then fasten it with the
socket ring (L). - Install the bulb (M). Make sure to use light bulb(s) with
wattage no greater than specified on this fixture. Always make sure
that electrical current is turned off before changing bulbs.
Please use ON/OFF type A bulb max 40-watt or CFL bulb max
13-watt or LED bulb max 9-watt. There are LED 3pcs 4-watt bulbs
included in the box. Enjoy your lamp!
WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this luminaire cannot be replaced If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION
A
mounting screw
PICTURE QUANTITY PIECE DESCRIPTION
2X
H
closable Link
PICTURE
QUANTITY 4X
B mounting plate
1X
I
chain
2X
C machine screw
2X
J
body
1X
D ground screw
1X
K glass shade
3X
E wire connector
3X
L socket ring
3X
F
canopy
1X
M
bulb
3X
G
screwed ball
2X
1/2
Model#: JYL7590A Product Dimensions: 36″L X 9.75″W X 24-96″H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1. Thread mounting screws (A) into the mattch holes of the mounting plate(B), then fix the mounting plate(B) to the outlet box with machine screw(C).
2.Connect chain(I) by loop of the body (J) and loop of the canopy (F) with the closable link(H).
3. Make wire connections, with wire connectors(E), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:
Black * Parallel Cord (round & smooth)
Clear, Brown, Gold or Black without Tracer stripes)
(colored
Connect, Neutral, White Outlet Supply Wire to: White
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(D) on mounting plate, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting plate. Tighten ground screw.
4. Orient the ceiling canopy(F) so that the mounting screws(A) protruding from the mounting plate (B) go into the holes in the canopy (F), then secure it with the provided screwed balls(G).
5. Put the glass shade(K) on socket,then fasten it by socket ring(L).
6. Install bulb(M). Be sure to use light bulb(s) with wattage no greater than specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
PLEASE USE ON/OFF TYPE “A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT, THERE ARE LED 3PCS 4WATT BULB IN THE BOX ENJOY YOUR LAMP
2/2
