JYL7584A 4-Light Pendants Light
Product Information
The JYL7584A is a lighting fixture that comes with a mounting
bracket, ground screw, outlet box screw, wire nut, fixture body,
glass shade, socket ring, canopy unit, canopy nut, light bulb, 6
rod, and 12 rod. The product dimensions are 15.5Wx15.5W x29-59H. It
is recommended to have a licensed electrician install the fixture
and to switch off the main electrical supply from the main fuse
box/circuit breaker before installation. The external flexible
cable or cord of this lamp cannot be replaced. If the cord is
damaged, the lamp shall be destroyed.
Product Usage Instructions
- Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Time: 20 minutes. - Raise the 12 rod (G) and 6 rod (F) threaded to the fixture body
(H), then attach the swivel (E1) to the rod (F). - Attach the mounting bracket (A) to the junction box (not
included) with the two outlet box screws(C), then connect wires.
Connect Hot, Black or Red Outlet Supply Wire to black parallel cord
(round & smooth) and connect Neutral, White Outlet Supply Wire
to white parallel cord (square & ridged). Make sure to follow
the grounding instructions for installation in the US or
Canada. - Raise the canopy unit (E) thread to the outlet box screws,
secure with canopy nut (L). - Attach the glass shade (I) to the socket with socket ring
(J). - Install the light bulb (K) to the socket. Please use Type A
bulb max 40-watt or CFL bulb max 13-watt or LED bulb max 9-watt.
There is an LED 4-watt bulb in the box. Make sure that electrical
current is turned off before changing bulbs.
WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION
A
Mounting bracket
B Ground screw
C
Outlet box screw
D
Wire nut
PICTURE QUANTITY PIECE DESCRIPTION
1X
H
Fixture body
1X
2X
I
Glass shade
3X
J
Socket ring
PICTURE
QUANTITY 1X 4X 4X
Model#: JYL7584A Product Dimensions: 15.5″Wx15.5″W x29″-59″H
E Canopy unit
1X
K
Light bulb
4X
F
6″ rod
2X
L
Canopy nut
2X
G
12″rod
2X
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1.Raise the 12″ rod (G) and 6″ rod (F) threaded to the fixture body (H), then attach the swivel (E1) to the rod (F).
2..Attach the mounting bracket (A) to the junction box (not included) with the two outlet box screws(C) , then connect wires.
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black * Parallel Cord (round & smooth)
White * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(B) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire nut. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.
3. Raise the canopy unit (E) thread to the outlet box screws, secure with canopy nut (L).
4. Attach the glass shade (I) to the socket with socket ring (J).
5. Install the light bulb (K) to the socket.
specified on this fixture. Make sure that electrical current is turned off before changing bulbs. PLEASE USE TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP 2/2
