TOB 2032 Vivian Single Sconce Wall Light
Product Information
Product Name: Vivian Single Sconce
Item Number: TOB 2032
Product Description: The Vivian Single Sconce
is a light fixture designed for wall mounting. It requires proper
installation and adherence to local installation codes for safe and
efficient operation.
Important Notice: This light fixture should be
installed by a person familiar with its construction and operation,
as well as the associated hazards. Before installation, carefully
inspect the item and its contents for any damage or defects. Do not
proceed with installation if any issues are found. Retain all
packaging materials until installation is complete and
approved.
Product Usage Instructions
- Carefully remove all parts from the box.
- Loosen the side screws (C) to remove the mounting plate (B)
from the backplate (F). - Affix the mounting plate (B) onto the outlet box and secure it
with the provided mounting screws (D). - Attach the arm (J) to the connector (I) and secure it using the
lock washer (H) and lock nut (G). - Attach the connector (I) to the backplate (F) and secure it
with the provided screws (E). - Connect the hot wire (BLACK) from the fixture to the hot wire
from the outlet box, following proper electrical wiring
practices.
Care Instructions
To clean the Vivian Single Sconce, use only a soft dry cloth or
feather duster. Do not use abrasive or chemical agents, as they may
damage the fixture.
Note: This product is listed and approved for
use in the United States (US).
ASSEMBLY INSTRUCTIONS
Outlet box
K
I Bulb
(Not included)
J
A
B C D E F GH
Vivian Single Sconce
Item # TOB 2032
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Remove the mounting plate (B) from backplate (F) by loosening side
screws (C). 3. Affix mounting plate (B) onto the outlet box and secure with mounting
screws (D). 4. Attach the arm (J) to the connector (I) and secure with lock washer (H)
and lock nut (G). 5. Attach the connector (I) to the backplate (F) and secure with screws (E). 6. Connect the hot wire (BLACK) from the fixture to the hot wire from the
outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape. 7. Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE). DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. 8. Connect ground wire from the fixture (bare copper) to ground wire from the outlet box (usually green or copper in color). IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. 9. Attach backplate (F) onto the mounting plate (B) and secure with side screws (C). 10. Insert bulb (not included) into the socket. 11. Clip the shade (K) onto the bulb. 12. Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
