CHD 2526 Double Library Wall Light
Product Information:
The Parkington Double Library Wall Light (Item # CHD 2526) is a
stylish and functional light fixture designed for wall
installation. It features a metal shade and a glass shade, creating
a unique and elegant look. The fixture is equipped with an LED
light source, providing energy-efficient and long-lasting
illumination. Please note that the light bulb is not included with
the product.
Product Usage Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Using a Phillips screwdriver, remove the screws (D) to detach
the mounting plate (B) from the fixture. - Install the mounting plate (B) to the junction box and secure
it using the provided mounting screws (C). - Wrap the fixture ground wire (bare copper) around the green
grounding screw in the junction box and tighten it securely. - Connect the fixture wires to the corresponding wires in the
junction box, following the local installation codes. - Gently push the excess wires into the junction box and
carefully position the fixture against the mounting plate. - Tighten the screws (D) to secure the fixture to the mounting
plate. - Ensure that all connections are secure and properly
insulated. - Turn on the power supply and test the light fixture.
- To adjust the position of the fixture, loosen the knobs (H),
move it to the desired position, and then tighten the knobs (H)
again. - Install a compatible light bulb into the socket.
Care Instructions:
To maintain the appearance of the Parkington Double Library Wall
Light, clean it only with a soft dry cloth or a feather duster.
Avoid using abrasive or chemical agents, as they may damage the
finish of the fixture.
ASSEMBLY INSTRUCTIONS
Diagram 1 H
H A BC D E
F Glass Shade
H G
Metal Shade Bulb not included
Parkington Double Library Wall Light
Item # CHD 2526
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver
Slotted Screwdriver
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove mounting plate (B) from fixture by removing screws (D). 3. Install mounting plate (B) to the junction box and secure with the
mounting screws (C). 4. Wrap fixture ground wire (bare copper) around the green grounding
screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (A). NOTE: It is imperative that the fixture is grounded. 5. Connect fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (A). 6. Connect fixture hot wire (black) to the supply hot wire (usually black) using wire nut (A). CAUTION: Do not reverse the hot and neutral connections. 7. Make sure all wire connections are tight, then carefully tuck into the junction box. 8. Install fixture to mounting plate (B) by securing with screws (D). 9. Loosen thumb screws (G) and insert top of shade (F), then secure with thumb screws (G). NOTE: Do not overtighten otherwise shade could become damaged.
LED
ASSEMBLY INSTRUCTIONS
Diagram 1
H A BC D E
H
H G
Parkington Double Library Wall Light Item # CHD 2526
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
10. To adjust fixture loosen knobs (H), adjust to desired position, then tighten knobs (H).
11. Install light bulb into the socket.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Bulb not included
F
Glass Shade
Metal Shade
LED
