TOB 1153 Caron Floor Lamp
Product Information
The Caron Floor Lamp (Item # TOB 1153) is a light fixture
designed to provide illumination in a room. It comes with various
components that need to be assembled for proper usage. Please
follow the assembly instructions below to ensure safe and effective
installation.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Thread the body tube (C) to the base (B).
- Thread the shade riser (D) to the top of the lamp body. Adjust
the shade riser (D) to the desired height and tighten the
adjustment knob. - Remove the finial (F) from the shade riser (D).
- Remove the shade (E) from its packaging and install it to the
shade riser (D) by securing it with the finial (F). If the shade
has additional packaging, carefully cut it off from the interior of
the shade to avoid damages. - Install light bulbs into the sockets.
- Remove the protective cover (A) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Note: Before installing the Caron Floor Lamp,
make sure to comply with all applicable local installation codes.
It is recommended that the installation be carried out by a person
familiar with the construction and operation of light fixtures and
aware of the potential hazards involved. Inspect all parts and
contents carefully before installation. If any damage or defect is
found, do not proceed with installation. Retain all packaging
material until the installation is complete and approved.
Care Instructions
To maintain the lamp’s cleanliness, clean it only with a soft
dry cloth or feather duster. Avoid using abrasive or chemical
agents as they may damage the lamp’s surface.
ASSEMBLY INSTRUCTIONS
F E (Packaged separately)
D Bulb not included
C
B A
Caron Floor Lamp Item # TOB 1153
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Thread body tube (C) to base (B). 3. Thread shade riser (D) to the top of lamp body. adjust shade riser (D)
to desired height, the tighten adjustment knob. 4. Remove finial (F) from shade riser (D). 5. Remove shade (E) from packaging and install to shade riser (D)
by securing with finial (F). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 6. Install light bulbs into the sockets. 7. Remove protective cover (A) from plug. 8. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
