S 1400 Dauphine Floor Lamp
Product Information
The Dauphine Floor Lamp (Item # S 1400) is a stylish and
functional lighting fixture that adds elegance to any room. It is
designed to be assembled and installed by a person familiar with
construction and electrical hazards. The lamp requires a bulb (not
included) to provide illumination.
Important Notice:
This light fixture should be installed in accordance with all
applicable local installation codes. Inspect the item and its
contents carefully before installation. If any damage or defect is
found, do not proceed with installation. Retain all packaging
material until installation is complete and approved.
Assembly Instructions
- Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the
finial (A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet and test the
fixture. - Installation is complete.
Care Instructions
To keep the Dauphine Floor Lamp in optimal condition, follow
these care instructions:
- Clean only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents, as they may damage the
lamp’s surface.
Note: The Dauphine Floor Lamp is UL listed for
use in the United States.
ASSEMBLY INSTRUCTIONS
A
B
C Bulb (Not included) D
E
Dauphine Floor Lamp
Item # S 1400
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
