S 111 Bamboo Floor Lamp
Product Information:
Product Name: Bamboo Floor Lamp
Item Number: S 111
This bamboo floor lamp is designed to provide ambient lighting
in your living space. It features a socket (C) for inserting a bulb
(not included) and a shade (B) that can be securely attached to the
socket using the socket ring (A). The lamp is designed to be
plugged into a proper electrical outlet for operation.
Please note that this light fixture should be installed in
accordance with all applicable, local installation codes. It is
recommended to have it installed by a person familiar with the
construction and operation of such fixtures, as well as the hazards
involved. Before installation, carefully inspect the item and its
contents. If any damage or defect is found, do not proceed with the
installation. Retain all packaging material until installation is
complete and approved.
Product Usage Instructions:
- Carefully remove all parts from the box.
- Place the shade (B) onto the socket (C) and secure it with the
socket ring (A). - Insert a bulb (not included) into the socket (C).
- Remove the protective plug cover (D) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning properly.
- Installation is complete.
Care Instructions:
To clean the bamboo floor lamp, use only a soft dry cloth or
feather duster. Avoid using abrasive or chemical agents, as they
may damage the lamp’s surface.
This product is listed and approved for use in the United States
(US).
ASSEMBLY INSTRUCTIONS
A B
BULB (Not included) C
Bamboo Floor Lamp
Item # S 111
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Place shade (B) to the socket (C) and secure with socket ring (A). 3. Insert bulb (not included) into the socket (C). 4. Remove protective plug cover (D) from the plug. 5. Plug into a proper electrical outlet and test the fixture. 6. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
D
M
LI ST ED
US
