SK 3005 Wyatt Table Lamp
Product Information
Product Name: Wyatt Table Lamp
Item Number: SK 3005
Installation Requirements: This light fixture should be
installed in accordance with all applicable, local installation
codes, and by a person familiar with the construction and operation
of it, as well as the hazards involved.
Package Inspection: Inspect item and contents carefully. If any
damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box.
- Install harp (C) onto the saddle (D).
- Place shade (B) onto the harp (C) and secure with finial
(A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning properly.
- Installation is complete.
Care Instructions
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: This product is listed for use in the United States
(US).
ASSEMBLY INSTRUCTIONS
Wyatt Table Lamp
Item # SK 3005
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
