KW1022 Alessio Medium Floor Lamp
Alessio Medium Floor Lamp
Item # KW1022
NOTICE: This light fixture should be installed in accordance
with all applicable, local installation codes, and by a person
familiar with the construction and operation of it, as well as the
hazards involved. Inspect item and contents carefully. If any
damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Product Information
- Includes parts A, B (packaged separately), C, D, E
- Bulbs not included
- Tools required (not included): Scissors
- Care instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents. - Product listed for use in the US
Assembly Instructions
- Carefully remove all parts from the box. Place on a clean, soft
surface. - Install light bulbs into sockets.
- Remove shade (B) from packaging, then align holes on shade ring
with screws (E) on fixture body (C) and turn clockwise until locked
in place. See diagram 1. - NOTE: If shade has additional packaging, carefully cut off from
interior of shade to avoid damages. - Place diffuser (A) on the top of shade (B).
- Remove protective plug cover (D) from the plug.
- Plug into electrical outlet and test the fixture.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
Bulbs not included C
E
Diagram 1
D
Alessio Medium Floor Lamp
Item # KW1022
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install light bulbs into sockets. 3. Remove shade (B) from packaging, then align holes on shade ring
with screws (E) on fixture body (C) and turn clockwise until locked in place. See diagram 1. NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Place diffuser (A) on the top of shade (B). 5. Remove protective plug cover (D) from the plug. 6. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
