S 3400 Dauphine Bedside Lamp
Product Information: Dauphine Bedside Lamp
Item #: S 3400
This Dauphine Bedside Lamp is a stylish and functional lighting
fixture that can be used to illuminate your bedroom or any other
living space. It features a sleek design with a harp, shade, and
finial, providing a soft and warm glow to your surroundings. The
lamp is designed to be plugged into a standard electrical outlet
and can accommodate a bulb (not included) for adjustable
brightness.
Assembly Instructions:
- Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the
finial (A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning correctly.
- Installation is complete.
Care Instructions:
To keep your Dauphine Bedside Lamp in optimal condition, follow
these care instructions:
- Clean the lamp only with a soft dry cloth or feather
duster. - Avoid using abrasive or chemical agents, as they may damage the
lamp’s surface.
Please note that this light fixture should be installed in
accordance with all applicable local installation codes by someone
familiar with its construction and operation. If any damage or
defect is found during inspection, do not proceed with installation
and contact the manufacturer for assistance. Retain all packaging
materials until the installation is complete and approved.
The Dauphine Bedside Lamp is listed and approved for use in the
US.
ASSEMBLY INSTRUCTIONS
Dauphine Bedside Lamp
Item # S 3400
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
