AH 3127 Penelope Table Lamp
Product Information:
- Product Name: Penelope Table Lamp
- Item Number: AH 3127
- Bulbs: Not included
Product Usage Instructions:
- Remove all parts from the box and place them on a clean, soft
surface. - Thread the shade riser (C) to the top of the cluster (E).
- Remove the finial (A) from the shade riser (C).
- Remove the shade (B) from its packaging and install it to the
shade riser (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install light bulbs into the sockets.
- Remove the protective cover (D) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is functioning properly.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C E Bulbs not included
D
Penelope Table Lamp Item # AH 3127
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Thread shade riser (C) to the top of cluster (E). 3. Remove finial (A) from shade riser (C). 4. Remove shade (B) from packaging and install to shade riser (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulbs into the sockets. 6. Remove protective cover (D) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
