CHA8461 Swedish Column Bufet Lamp
Product Information:
Product Name: Swedish Column Buffet Lamp
Item Number: CHA8461
Version: ALB (or CG)
Bulb: Not included
Approved: Listed for use in the US
Assembly Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Remove socket ring (A) from socket (C).
- Remove shade (B) from packaging and install it onto socket (C)
by securing it with socket ring (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective plug cover (D) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
ALB Version
Bulb not included A B C
D
Swedish Column Bufet Lamp
Item # CHA8461
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (A) from socket (C). 3. Remove shade (B) from packaging and install to socket C) by
securing with socket ring (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into socket. 5. Remove protective plug cover (D) from the plug. 6. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
ASSEMBLY INSTRUCTIONS
CG Version
Bulb not included A B C
D
Swedish Column Bufet Lamp
Item # CHA8461
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (A) from socket (C). 3. Remove shade (B) from packaging and install to socket C) by
securing with socket ring (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into socket. 5. Remove protective plug cover (D) from the plug. 6. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
