TOB 3734 Carmel Table Lamp
Product Information
The Carmel Table Lamp (Item # TOB 3734) is a light fixture that
requires assembly and installation. It is designed to be used with
a bulb (not included) and is suitable for use in accordance with
all applicable, local installation codes. The lamp comes with a
harp (C), saddle (D), lampshade (B), finial (A), and a plug cover
(E). It should be installed by a person familiar with its
construction and operation.
Product Usage Instructions
- Carefully unpack all parts from the box.
- Attach the harp (C) to the saddle (D).
- Place the lampshade (B) onto the harp (C) and secure it with
the finial (A). - Insert a bulb (not included) into the socket.
- Remove the plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is working properly.
- Installation is now complete.
Care Instructions:
To clean the Carmel Table Lamp, use only a soft dry cloth or
feather duster. Do not use abrasive or chemical agents that may
damage the lamp.
Note: This light fixture is listed
for use in the United States.
ASSEMBLY INSTRUCTIONS
A B
C
Bulb (Not included) D
E
Carmel Table Lamp
Item # TOB 3734
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) to the saddle (D). 3. Place the lampshade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove the plug cover (E) from the plug. 6 Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
