TOB 3684 Loren Large Table Lamp
Product Information: Loren Large Table Lamp
Item #: TOB 3684
This table lamp is designed to provide lighting in any room. It
comes with a harp, shade, and a socket for installing a light bulb.
The lamp is suitable for use in accordance with all applicable,
local installation codes. Please read and follow the assembly
instructions carefully to ensure safe installation and operation of
the lamp.
Assembly Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damage. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Note: Before installing the lamp, inspect all
parts and contents carefully. If any damage or defect is found, do
not proceed with the installation. Retain all packaging material
until installation is complete and approved.
Care Instructions
To clean the lamp, use only a soft dry cloth or feather duster.
Do not use abrasive or chemical agents as they may damage the
lamp’s surface.
Important: This lamp is listed and approved for
use in the United States.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included
D E
Loren Large Table Lamp Item # TOB 3684
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into the top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
