TOB 3681 Niki Medium Table Lamp

Product Information: Niki Medium Table Lamp

Item #: TOB 3681

This Niki Medium Table Lamp is a stylish lighting fixture that
adds a touch of elegance to any room. It comes with all the
necessary parts for assembly and installation. Please read the
following usage instructions carefully before setting up the
lamp.

Assembly Instructions:

1. Carefully remove all parts from the box and place them on a
   clean, soft surface.
2. Install the harp (C) by squeezing it together and inserting it
   into the top of the saddle (D).
3. Remove the finial (A) from the harp (C).
4. Remove the shade (B) from its packaging and install it to the
   harp (C) using the finial (A). If the shade has additional
   packaging, carefully cut it off from the interior of the shade to
   avoid damages.
5. Install a light bulb into the socket.
6. Remove the protective cover (E) from the plug.
7. Plug the lamp into an electrical outlet and test the
   fixture.

Care Instructions:

Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents that may damage the lamp’s
surface.

Note: This light fixture should be installed in accordance with
all applicable local installation codes and by a person familiar
with its construction and operation, as well as the hazards
involved. Inspect the item and its contents carefully. If any
damage or defect is found, do not install the lamp. Retain all
packaging material until installation is complete and approved.

ASSEMBLY INSTRUCTIONS

A B (Packaged separately) C Bulb not included D
E

Niki Medium Table Lamp Item # TOB 3681
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

M

LI ST ED

US