HED6045-BT Bluetooth LED Driver
LED Drivers with 5.0 SIG Mesh
Product Description
The HED6045/BT is a Bluetooth dimmable LED driver that can
output a maximum power of 45W. It comes with a Switch-Dim interface
that uses a Push switch and a Bluetooth dimming interface. This
product is perfect for direct projects or new luminaire designs for
lighting manufacturers. With Bluetooth wireless mesh networking, it
makes communication between luminaires much easier without
time-consuming hardwiring, which eventually saves costs for
projects. Meanwhile, simple device setup and commissioning can be
done via the DApp.
DApp Features
- Quick setup mode & advanced setup mode
- Floorplan feature to simplify project planning
- Web app/platform for dedicated project management
- rKoolmesh Pro iPad version for on-site configuration
- Grouping luminaires via mesh network and scenes
- Detailed motion sensor settings
- Push switch configuration
- Schedule to run scenes based on time and date
- Astro timer (sunrise and sunset)
Hardware Features
- Switch-Dim
- Flicker-free (1-100%)
- Analogue Bluetooth dimmable control
- Insulated terminal cover with cord restraint
- >0.93 Active PFC design logarithmic dimming linear
dimming - Configurable constant current (CC) output via DIP switch
- Loop-in and loop-out terminals for efficient installation
- Staircase function (primary & secondary)
- Internet-of-Things (IoT) featured
- Open-circuit protection
- Short-circuit protection
- Overload protection
- Bulk commissioning (copy and paste settings)
- Power-on status (memory against power loss)
- 5-year warranty, designed for long lifetime up to 50,000
hours - Offline commissioning
- Different permission levels via authority management
- Network sharing via QR code or keycode
- Remote control via gateway support HBGW01
- Interoperability with Hytronik Bluetooth product portfolio
sensors, such as HBIR29, HCD038/BT + sensor head, etc. - Compatible with EnOcean switch HBES01/W & HBES01/B
- Continuous development in progress…
*Certain scenes that require an external photocell can be
achieved by using together with Hytronik Bluetooth sensors, such as
HBIR29, HCD038/BT + sensor head, etc.
Output Configuration
Fully support EnOcean self-powered switch module PTM215B
(HBES01/W & HBES01/B)
Warning: Please make sure the correct current
is selected before starting the driver!
Technical Specifications
- Bluetooth Transceiver Operation frequency: 2.4 GHz – 2.483
GHz - Transmission power: 4 dBm
- Range (Typical indoor): 10~30m
- Environment Operation Temp.: -20 ~ +50
- Case Temp. (Max.): 80
- IP Rating: IP20
- Protocol: 5.0 SIG Mesh
- Safety and EMC Input Mains Voltage: 220~240VAC 50/60Hz
- Mains Current: 0.24~0.22A
- Power Factor: 0.95
- Max. Efficiency Psb/Pno: 89%
Product Usage Instructions
Before starting the driver, make sure to select the correct
current output via the DIP switch. You can use the Bluetooth
dimming interface or the Switch-Dim interface using a Push switch
to control the LED driver’s output.
To set up and commission the device, use the DApp with features
such as Quick setup mode and advanced setup mode, Floorplan feature
to simplify project planning, and Web app/platform for dedicated
project management. You can also use the rKoolmesh Pro iPad version
for on-site configuration.
The hardware features of the LED driver include Staircase
function (primary & secondary), Internet-of-Things (IoT)
featured, Open-circuit protection, Short-circuit protection,
Overload protection, Bulk commissioning (copy and paste settings),
Power-on status (memory against power loss), and more. The LED
driver has a 5-year warranty and is designed for long lifetime up
to 50,000 hours.
The LED driver is compatible with EnOcean switch HBES01/W &
HBES01/B and supports EnOcean self-powered switch module PTM215B
(HBES01/W & HBES01/B).
For certain scenes that require an external photocell, you can
use Hytronik Bluetooth sensors, such as HBIR29, HCD038/BT + sensor
head, etc.
LED Drivers with
5.0 SIG Mesh
HED6045/BT Dimmable Driver & Constant Current
Product Description
HED6045/BT is a Bluetooth dimmable LED driver, with maximum power
output of 45W. It comes with Switch-Dim interface by using Push switch
(retractive switch) and of course Bluetooth dimming interface. It is ideal for
direct projects or new luminaires design for lighting manufacturers. With
Bluetooth wireless mesh networking, it makes communication between
luminaires much easier without time-consuming hardwiring, which eventually
saves costs for projects. Meanwhile, simple device setup and commissioning
can be done via
app.
DApp Features Quick setup mode & advanced setup mode Floorplan feature to simplify project planning Web app/platform for dedicated project management rKoolmesh Pro iPad version for on-site configuration Grouping luminaires via mesh network a Scenes Detailed motion sensor settings Push switch configuration f Schedule to run scenes based on time and date t Astro timer (sunrise and sunset)
Hardware Features Switch-Dim Flicker free (1-100%)
ANALOGUE
Bluetooth dimmable control Insulated terminal cover with cord restraint >0.93 Active PFC design Logarithmic Dimming Linear Dimming Configurable constant current (CC) output via DIP switch Loop-in and loop-out terminals for efficient installation
Staircase function (primary & secondary) Internet-of-Things (IoT) featured
Open-circuit Open-circuit Protection Protection
Device firmware update over-the-air (OTA)
Short-circuit Protection
Device social relations check
Overload Protection
Bulk commissioning (copy and paste settings) Power-on status (memory against power loss)
5-year warranty, designed for long lifetime up to 50,000 hours
Offline commissioning Different permission levels via authority management
* Certain scenes which require external photocell can
Network sharing via QR code or keycode
be achieved by using together with Hytronik Bluetooth
Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio
sensors,such as HBIR29, HCD038/BT + sensor head etc.
Compatible with EnOcean switch HBES01/W & HBES01/B
Continuous development in progress…
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 1/6
5.0 SIG mesh
iOS
Android
for iOS
for Android
Smartphone app for both iOS & Android platform
for iPad
Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com
Output Configuration
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
D1050mA 1000mA 950mA 900mA 800mA 700mA 600mA 500mA 350mA 12345 rWarning: Please make sure the correct current is selected before starting the driver!
a Technical Specifications
Bluetooth Transceiver Operation frequency
f Transmission power t Range (Typical indoor)
2.4 GHz – 2.483 GHz 4 dBm 10~30m
Environment Operation Temp. Case Temp. (Max.) IP Rating
-20 ~ +50 80 IP20
Protocol
5.0 SIG Mesh
Safety and EMC
Input Mains Voltage Mains Current Power Factor Max. Efficiency Psb/Pno
220~240VAC 50/60Hz 0.24~0.22A 0.95 89% <0.5W
EMC Standard
Safety Standard Dielectric strength Abnormal protection
EN55015, EN61547,
EN61000-3-2/-3-3, EN300328,
EN301489-1/-17, EN50663
EN61347-1, EN61347-2-13
Input¹output: 3000VAC / 5mA /1min Output short-circuit protection Overload Protection Open-circuit Protection
Output Output Current Output Voltage Uout Max. Turn-on Time
Dimming Interface
350mA~1050mA 10-54V 75VDC <0.5s
Switch-Dim
Max. output power/current/voltage range
HED6045/BT
3.5-19W/ 350mA /10-54VDC
5-27W/ 500mA /10-54VDC 6-32W/ 600mA /10-54VDC 7-38W/ 700mA /10-54VDC
8-42W/ 800mA /10-52VDC 9-45W/ 900mA /10-50VDC 9.5-45W/ 950mA /10-47VDC 10-45W/ 1000mA /10-45VDC 10.5-44W/ 1050mA /10-42VDC
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 2/6
Mechanical Structure & Dimensions
P1 P2
L
N
LED+ LED
LED current selection
3.9
DBuilt-in installation r a f 126
129.4
t 140.6
79.2
Stand-alone installation 4.1
185
79.2
23
23
Wire Preparation
0.75 – 1.5mm 8mm
To make or release the wire from the terminal, use a screwdriver to push down the button.
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 3/6
Wiring Diagram
P1
P1
P1
P2
P2
P2
L
L
N
L
N
N
LED+ LED
P1 P1 P2
D P2 L L N N LED+ LED
r a Note: There is no need for any hardwirings on “push” terminal between one driver to another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
f t Loading and In-rush Current
Model
HED6045/BT
In-rush Current (Imax.)
17.8A
Pulse Time
72 s
Circuit Breaker Information
Automatic circuit breaker type HED6045/BT
B16A 43
B10A 27
B13A 35
B20A 54
B25A 67
The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%. Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different types of circuit breaker used and installation environment.
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 4/6
Performance Characteristics
1.0
0.9
1.00 0.8
0.98 0.7
0.96
EFFICIENCY
0.6
0.94
PF Power output(%)
0.5
500mA
0.92
0.4
700mA
0.90
1000mA
0.88
0.3
0.86
0.2
0.84
0.1
0.82
220V 230V 240V
0
50%
60% 70% 80% 90% 100% LOAD
0
50%
60%
70%
80%
90% 100% LOAD
D* Typical Efficiency vs Load
* Typical Power Factor vs Load
Dimming Characteristics
100
100
r90
90
80
80
70
70
a 60
60
50
50
40
40
30
30
20
20
10
10
f 0
0
t 10 20 50 100
1% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Power output(%)
Dim Level
Dim Level
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 5/6
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up to 64 LED drivers maybe connected to one switch. Detailed Push switch configurations can be set on Koolmesh app.
Switch Function
Action
Descriptions
Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid.
– Turn on/off – Turn on only – Turn off only
– Recall a scene – Quit manual mode – Do nothing
Push switch Sensor-link
DEmergency Self-Test Function r a Fire Alarm (VFC signal only)
Double push
Long press (1 second)
/ Short press (<1 second)
* Short press has to be longer than 0.1s, or it will be invalid.
– Turn on only – Turn off only – Recall a scene
– Quit manual mode – Do nothing
– Dimming – Colour tuning – Do nothing
– Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
– Start Self test (Monthly) – Start Self test (Annually)
– Stop Self test
– Invalid
Long press (1 second)
– Start Self test (Monthly) – Start Self test (Annually)
– Stop Self test
– Invalid
Refer to
App User Manual V2.1
– Able to connect the Fire Alarm system – Once the fire alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it’s full on), after the fire alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status.
Additional Information / Documents
f 1. Regarding precautions for LED driver installation and operation, please kindly refer to t www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. Draft Page 6/6
iot.koolmesh.com
