DALI-2 DT6 Dimmable LED Driver Bluetooth Sensor
Product Information
The HEC7030/BF is a DALI-2 DT6 dimmable LED driver + Bluetooth
sensor head in a detached design. It has a maximum power output of
30W. The detached design allows for flexibility, with the option
for motion detection for lighting manufacturers. When the Bluetooth
sensor head is unattached, it functions solely as a DALI-2 DT6 LED
driver. When the Bluetooth sensor head is attached, it becomes a
LED driver + sensor combo. The device utilizes Bluetooth wireless
mesh networking, making communication between luminaires easier
without the need for hardwiring, ultimately saving costs for
projects. The device can be easily set up and commissioned using a
smartphone app.
App Features
- Hardware Features
- DALI-2 with DALI feedback
- Switch-Dim (Push switch)
- 1KHz PWM (1-100%)
- STD-BY < 0.5W Stand-by power
- Logarithmic Dimming
- Linear Dimming
- Configurable constant current (CC) output via DIP switches
- Permanent setting memory, protected against loss of power
- Short-circuit Protection
- Open-circuit Protection
- Overload Protection
- 5-year warranty, designed for long lifetime up to 50,000
hours - Fully support EnOcean self-powered switch module PTM215B
(HBES01/W & HBES01/B)
Output Configuration
HEC7030/BF has the following output configuration:
| Output Current | Output Voltage |
|---|---|
| 900mA | 10-57V |
| 750mA | 10-57V |
| 700mA | 10-57V |
| 550mA | 10-57V |
| 500mA | 10-57V |
| 350mA | 10-57V |
Product Usage Instructions
Warning: Please make sure to select the correct
current before starting the driver!
To use the HEC7030/BF LED driver + sensor combo, follow these
steps:
- Ensure that the Bluetooth sensor head is properly attached to
the LED driver if you want to utilize the sensor functionality. If
not, proceed to the next step. - Connect the input mains voltage to the LED driver. The mains
voltage should be within the range of 220-240VAC and have a
frequency of 50/60Hz. - Select the desired output current based on your requirements.
The available options are 900mA, 750mA, 700mA, 550mA, 500mA, and
350mA. - Connect the LED load to the LED driver’s output terminals,
ensuring proper polarity. - Configure the dimming interface according to your needs. The
LED driver supports DALI-2 with DALI feedback, Switch-Dim (Push
switch), and 1KHz PWM dimming. - If necessary, adjust the dimming settings using the provided
DIP switches to achieve the desired constant current (CC)
output. - Make sure to protect the LED driver against short-circuits,
open-circuits, and overloads. - Once everything is set up, power on the LED driver and verify
that the connected luminaires are functioning as expected.
Note: For more advanced features and configuration options, you
can use the smartphone app available for both iOS and Android
platforms. The app allows for easy device setup and
commissioning.
For any further assistance or technical support, please refer to
the product’s 5-year warranty or visit the web app/platform at
www.iot.koolmesh.com.
DALI-2 DT6 LED Driver + Sensor Head with
5.0 SIG Mesh
HEC7030/BF
Constant Current
DALI
Product Description
HEC7030/BF is DALI-2 DT6 dimmable LED driver + Bluetooth sensor
head in detached design with maximum power output of 30W. Such
detached design is flexible with optional motion detection for lighting
manufacturers; with Bluetooth sensor head unattached, HEC7030/BF
is solely a DALI-2 DT6 LED driver; with Bluetooth sensor head attached,
it becomes a LED driver + sensor combo. With Bluetooth wireless mesh
networking, it makes communication between luminaires much easier
without time-consuming hardwiring, which eventually saves costs for
projects. Meanwhile, simple device setup and commissioning can be
done via
app.
App Features
Hardware Features
Quick setup mode & advanced setup mode Floorplan feature to simplify project planning Web app/platform for dedicated project management Koolmesh Pro iPad version for on-site configuration Grouping luminaires via mesh network Scenes Detailed motion sensor settings Push switch configuration Schedule to run scenes based on time and date Astro timer (sunrise and sunset) Staircase function (master & slave) Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Device social relations check Bulk commissioning (copy and paste settings) Power-on status (memory against power loss) Offline commissioning Different permission levels via authority management Network sharing via QR code or keycode Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio Compatible with EnOcean switch EWSSB/EWSDB Continuous development in progress…
DALI DALI-2 with DALI feedback
Switch-Dim (Push switch)
1KHz PWM 1KHz (1-100%)
STD-BY < 0.5W
Stand-by power<0.5W
Active PFC design
>0.93
Logarithmic Dimming
Linear Dimming
Configurable constant current (CC) output via DIP switches
Permanent setting memory, protected against loss of power
Short-circuit Protection
Open-circuit Open-circuit Protection Protection Overload Protection
5-year warranty, designed for long lifetime up to 50,000 hours
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2 Page 1/9
Output Configuration
HEC7030/BF,30W 900mA 750mA 700mA 550mA 500mA 350mA 12 3
Warning: Please make sure the correct current is selected before starting the driver!
5.0 SIG mesh
iOS
Android
for iOS
for Android
Smartphone app for both iOS & Android platform
for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com
Technical Specifications
Input Mains Voltage Mains Current Power Factor Max. Efficiency
Output Output Current Output Voltage Uout Max. Turn-on Time Dimming Interface
220~240VAC 50/60Hz 0.17~0.16A 0.9 86%
350mA~900mA 10-57V 75V <0.5s
Switch-Dim/DALI
Max. output power/current/voltage range
HEC7030/BF
3.5-20W/350mA /10-57V 5-29W/ 500mA /10-57V 5.5-30W/ 550mA /10-55V 7-30W/ 700mA /10-43V 7.5-30W/ 750mA /10-40V 9-23W/900mA /10-25V
Mechanical Structure & Dimensions
Environment Operation Temp. Case Temp. (Max.) IP Rating
-20 ~ +50 80 IP20
Safety and EMC
EMC Standard
Safety Standard Dielectric strength Abnormal protection
EN55015, EN61547,
EN61000-3-2/-3-3,
EN62479
EN61347-1, EN61347-2-13
Input¹output: 3000VAC / 5mA /1min Output short-circuit protection Overload Protection Open-circuit Protection
DALI
DALI
4.1
P L
N
60 69
4.1
Subject to change without notice.
RJ12
LED Current Selection LED- LED+
22.2
98.9 108
Edition: 11 Jul. 2022 Ver. A2 Page 2/9
Wire Preparation
Wiring Diagram
Wiring Diagram For DALI
L N DALI DALI
0.75 – 1.5mm 8mm
To make or release the wire from the terminal, use a screwdriver to push down the button.
DALI DALI P L N
LED- LED+
Wiring Diagram For Switch-Dim
L N
DALI DALI P L N
Subject to change without notice.
LED- LED+
Edition: 11 Jul. 2022 Ver. A2 Page 3/9
Loading and In-rush Current
Model
HEC7030/BF
In-rush Current (Imax.)
38A
Pulse Time
35 s
Circuit Breaker Information
Automatic circuit breaker type HEC7030/BF
B16A 54
B10A 34
B13A 43
B20A 67
B25A 84
The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%. Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different types of circuit breaker used and installation environment.
Performance Characteristics
EFFICIENCY
1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60
0
350mA 500mA 700mA
50%
60%
70%
80% 90% 100% LOAD
* Typical Efficiency vs Load
1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 0.84 0.82
0
220V 230V 240V
50%
60%
70%
80%
90%
* Typical Power Factor vs Load
100% LOAD
PF Power output(%)
Dimming Characteristics
Power output(%)
100
90
80
70
60
50
40
30
20
10
0
50
100
150
200
254
Dim Level
Subject to change without notice.
100
90
80
70
60
50
40
30
20
10
0
50
100
150
200
254
Dim Level
Edition: 11 Jul. 2022 Ver. A2 Page 4/9
Technical Specifications for Sensor Heads
Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol
2.4 GHz – 2.483 GHz 4 dBm 10~30m
5.0 SIG Mesh
HF Sensor Properties (HBT01)
Sensor principle Operation frequency Transmission power
High Frequency (microwave) 5.8GHz +/- 75MHz <0.2mW
Detection range*
Max installation height3m Max detection range8m (diameter)
Detection angle
30O ~ 150O
Environment Operation temperature Storage temperature Relative humidity IP rating
-20°C ~ 55°C Ta: -20°C ~ +70°C
0 ~ 90% IP20
PIR Sensor Properties (HIR13 & HIR16 & HIR62 & HIR62/R)
Sensor principle
PIR detection
Operation voltage
5VDC
Detection range *
HIR13 Max installation height15m (forklift)
12m (single person) Max detection range24m (diameter)
HIR16 Max installation height15m (forklift)
12m (single person) Max detection range18m * 6m (L * W) HIR62 Max installation height3m (forklift) Max detection range12m (diameter)
HIR62/R Max installation height12m (forklift)
8m (single person) Max detection range20m (forklift)
12m (single person)
Detection angle
360°
* The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
PIR & microwave sensor heads
The range of PIR and microwave sensor heads below with Bluetooth modules built in offers powerful number of Plug’n’Play feature options to expand the flexibility of luminaires design. This approach to luminaire design reduces space requirements and component costs whilst simplifying production.
Photocell AdvanceTM Daylight Sensor Sensor Antenna Bluetooth Module
4.1 29 31.7
A. HBT01
Surface mounting Photocell AdvanceTM The cable length is around 30cm.
RJ12 Connector
16 14 2
57.5 63.6 71.5
4.1 29 31.7
B. HBT02
Surface mounting Without motion sensor Photocell AdvanceTM The cable length is around 30cm.
Photocell AdvanceTM Daylight Sensor
Bluetooth Module
RJ12 Connector
16 14 2
57.5 63.6 71.5
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2 Page 5/9
20 23.2
32.6 17
Ø1Ø7.3.55
C. HIR13/S
Lens Housing
Surface mounting For highbay application IP65 (facia / lens part) The cable length is around 30cm.
RJ12 connector Lug
Ø 36.3
D. HIR13/F
Lens Accessories
Flush mounting
For highbay application
Ø48
IP65 (facia / lens part)
The cable length is around 30cm.
RJ12 connector
1.2 21.5
30.4 Ø41
Installation hole Installation hole
E.HIR13/C
Screw to the luminaire by conduit For highbay application IP65 (facia / lens part) The cable length is around 30cm.
Lens Accessories
RJ12 connector
Ø40.5
M13
12 42.7 63
25 25 33.9
Ø14
Installation hole
F.HIR16
PIR sensor head For highbay application IP65 (facia / lens part) The cable length is around 30cm.
Lens Accessories
RJ12
16.5 38.2
Installation hole
63
Ø33
45
27.5
33
75
49.5
Installation for HIR16
Thickness: 0.8mm 1.6mm
We suggest that the metal plate thickness to be 0.8mm 1.6mm to ensure perfect focal length for the PIR lens.
G. HIR62
PIR sensor head
RJ12
The cable length is around 30cm.
H. HIR62 with HA04
PIR sensor head
RJ12
The cable length is around 30cm.
Subject to change without notice.
Ø 26
21.7
22.4
31.8
Installation hole
Ø
+ 22.23 –
0.78 0.41
Ø 15 52
22
25
33.3
Installation hole
R2.3±0.1
17.2±0.1
44.2±0.1
Edition: 11 Jul. 2022 Ver. A2 Page 6/9
I. HIR62 with HA05 PIR sensor head
The cable length is around 30cm.
RJ12
Ø 15 68
27
Installation hole
Max R0.5
22.4 31.7
22±0.2
21.7
60±0.2
J. HIR62/R
PIR sensor head
IP65 (facia / lens part)
RJ12
Ø 36
The cable length is around 30cm.
Installation hole
Ø
+ 22.23
0.78 – 0.41
22.7 34 43.4
21.7
Detection Pattern
HBT01
0
4
Ceiling mounted height(m)
10% 30% 50%
75%
The detection range is heavily influenced by sensor placement (angle) and different walking paces.
It may be reduced to 2m(diameter) & 3m(height) under certain conditions (walking across).
3
HIR13 (High-bay)
HIR13: High-bay lens detection pattern for forklift @ Ta = 20OC (Recommended installation height 10m-15m)
A: Tangential movement B: Radial movement
h = max.15m ”
Tangential: max. 24m
h = max.15m
# Radial: max. 16m
insensitive
sensitive
insensitive
sensitive
Mount height 10m 11m 12m 13m 14m 15m
Tangential (A) max 380m2 (Ø = 22m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m)
Radial (B) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 177m2 (Ø = 15m) max 133m2 (Ø = 13m) max 113m2 (Ø = 12m)
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2 Page 7/9
HIR13: High-bay lens detection pattern for single person @ Ta = 20OC
(Recommended installation height 2.5m-12m)
A: Tangential movement
B: Radial movement
h = max.12m
”
Tangential: max. 20m
h = max.12m
#
Radial: max. 3m
insensitive
sensitive
insensitive
sensitive
Mount height 2.5m 6m 8m 10m 11m 12m
Tangential (A) max 50m2 (Ø = 8m)
Radial (B) max 7m2 (Ø = 3m)
max 104m2 (Ø = 11.5m) max 7m2 (Ø = 3m) max 154m2 (Ø = 14m) max 7m2 (Ø = 3m)
max 227m2 (Ø = 17m) max 7m2 (Ø = 3m) max 269m2 (Ø = 18.5m) max 7m2 (Ø = 3m) max 314m2 (Ø = 20m) max 7m2 (Ø = 3m)
HIR16
Up to 4m Up to 5m
3m
Up to 8m
5m
Up to10m
Up to 6m
12m
15m
*for forklift
Up to12m Up to 18m
Up to 6m
*The detection patterns are based upon 5km/h movement speed.
HIR62
HIR62/R
3
3m Tangential movement up to 12m
8m
*for person
12m
*for forklift
Tangential movement up to 12m
Tangential movement up to 20m
*The detection patterns are based upon 5km/h movement speed.
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2 Page 8/9
Dimming Interface Operation Notes
DALI
This series of products are supplied as `plug n’play DALI’ or `independent DALI’ system ready. These models are also fully DALI addressable and may be assigned to groups within the limits specified by the DALI protocol or supporting DALI controllers by using a DALI programming tool.
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up to 64 LED drivers maybe connected to one switch.
Switch Action Short press (<0.4 second) Note: short press has to be longer
than 0.1s, or it will be invalid. Long press (>0.4 second)
Synchronization Switch Action Long press (>15 seconds)
Response Toggle light on / off
Toggle dim light / increase brightness
Response All lights will dim down to minimum then return to 50% brightness
* We recommend the number of drivers connected to a switch does not exceed 25 pieces. The maximum length of the wires from push to driver should be no more than 20 meters.
Additional Information / Documents
1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance
2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
4. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
5. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation
6. Regarding precautions for LED driver installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
7. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
8. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 11 Jul. 2022 Ver. A2 Page 9/9
Catalogue_Hytronik
iot.koolmesh.com
