HBTD8200SF Bluetooth Dimmer
Product Information
The HBTD8200/F series is a Bluetooth built-in receiver node
designed for use with Bluetooth motion sensors to control
luminaires. It can also be used as a standalone Bluetooth control
unit for each luminaire. The product features four different
versions: ON/OFF control, Trailing Edge output, 1-10V output with
relay control, and DALI broadcast output. It has a compact design
and two screw holes to be built inside luminaires, along with two
push inputs for manual control. The product also has zero crossing
detection circuit to reduce in-rush current and prolong relay
lifetime (HBTD8200S/F and HBTD8200V/F) and overload protection.
Product Usage Instructions
To use the HBTD8200/F series, follow the steps below:
- Ensure that the luminaires are compatible with the HBTD8200/F
series. - Install the product inside the luminaire using the two screw
holes. - Connect the power supply to the product according to the
operating voltage specifications. - Download the Hytronik Koolmesh Pro app from the App Store or
Google Play Store. - Follow the instructions on the app to set up and commission the
device. - Select the appropriate version of the product (ON/OFF control,
Trailing Edge output, 1-10V output with relay control, or DALI
broadcast output) for your specific application. - Use the app to control the luminaires and adjust settings as
needed.
Note: Certain scenes which require external photocell can be
achieved by using together with Hytronik Bluetooth sensors,such as
HBIR29, HCD038/BT + sensor head etc. Refer to
www.hytronik.com/products/bluetooth technology ->Bluetooth
Sensors for more information. Also, refer to
www.hytronik.com/download ->knowledge ->Bluetooth Products –
Precautions for Product Installation and Operation for precautions
for Bluetooth product installation and operation.
Built-in Receiver Nodes with
5.0 SIG Mesh
HBTD8200S/F HBTD8200T/F HBTD8200V/F HBTD8200D/F
Relay Control
Trailing Edge
0/1-10V
DALI
Product Description
HBTD8200/F series are designed as Bluetooth built-in
receiver node. They can be used alongside our Bluetooth
motion sensor range as Bluetooth receiver nodes. Or, they can
also be used solely as Bluetooth control unit for each luminaire.
Whether for home use, commercial or industrial applications,
HBTD8200/F series does it all. Simple device setup and
commissioning can be done via
app.
DALI Version 1-10V Version
RED
Trailing Edge Version On-off Version
App Features Floorplan feature to simplify project planning Grouping luminaires via mesh network Scenes Push switch configuration Schedule to run scenes based on time and date Astro timer (sunrise and sunset) Device firmware update over-the-air (OTA) Power-on status (memory against power loss) Offline commissioning Different permission levels via authority management Network sharing via QR code or keycode Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio Compatible with EnOcean BLE switches Continuous development in progress…
* Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors,such as HBIR29, HCD038/BT + sensor head etc.
Hardware Features HBTD8200S/F: ON/OFF control with load ratings: 400VA (capacitive) & 800W (resistive) HBTD8200T/F: Trailing edge output – 150VA (capacitive)
Trailing Edge
HBTD8200V/F: 1-10V output: 400VA (capacitive) & 800W (resistive) with relay control HBTD8200D/F: 100mA DALI broadcast output for up to 50 LED drivers Compact design with two screw holes to be built inside luminaires 2 Push inputs for flexible manual control Zero crossing detection circuit to reduce in-rush current and prolong relay lifetime (HBTD8200S/F and HBTD8200V/F) Short-circuit protection Overload protection 5-year warranty
5.0 SIG mesh
iOS
Android
for iOS
for Android
Smartphone app for both iOS & Android platform
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Subject to change without notice.
for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com
Edition: 21 Jun. 2021 Ver. A1 Page 1/5
Technical Specifications
Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol
Environment Operation temperature Case temperature (Max.) HBTD8200S/F HBTD8200T/F HBTD8200V/F HBTD8200D/F Storage temperature Relative humidity IP rating Insulation
2.4 GHz – 2.483 GHz 4 dBm 10~30m
5.0 SIG Mesh
Ta: -20°C ~ +45°C
Tc: +75°C Tc: +80°C Tc: +75°C Tc: +75°C -20°C ~ 60°C 20 ~ 90%
IP20 Class II
Mechanical Structure & Dimensions
HBTD8200D/F – DALI Version
DA +
DA —
22
Input & Output Characteristics
Operating voltage: HBTD8200S/F HBTD8200T/F HBTD8200V/F HBTD8200D/F
220~240VAC 50Hz 230VAC 50Hz
220~240VAC 50Hz 220~240VAC 50/60Hz
Stand-by power
Load ratings: HBTD8200S/F HBTD8200T/F HBTD8200V/F HBTD8200D/F
<0.5W
400VA(capacitive), 800W(resistive) 150VA(capacitive), 150W(resistive) 400VA(capacitive), 800W(resistive)
100mA,16VDC(max. 50 devices)
Safety & EMC
EMC standard (EMC) EN55015, EN61547, EN62479, EN61000
Safety standard (LVD)
IEC/EN 61058, AS/NZS 61058
Radio Equipment (RED) EN300 328, EN301489-1/-17, EN62479
Certification
Semko, CB, CE , EMC, RED, RCM
HBTD8200V/F – 1-10V Version
1~10V —
1~10V +
22
46 52.1 58
46 52.1 58
L LN
S1 S2
3.1 46
L LN
S1 S2
3.1 46
HBTD8200T/F – Trailing Edge Version
22
46 52.1 58
L
N
S1 S2
Wire Preparation
466
3.1 46
0.75 – 4mm 8mm
Subject to change without notice.
HBTD8200S/F – On/off Version
22
L LN
S1 S2
46 52.1 58
466
3.1 46
To make or release the wire from the terminal, use a screwdriver to push down the button. 1. 200 metres (total) max. for 1mm² CSA (Ta = 50¥) 2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50¥)
Edition: 21 Jun. 2021 Ver. A1 Page 2/5
Wiring Diagram
DALI Version HBTD8200D/F
DA
L
LED
N
LED
DA L L N S1 S2
S1 S2
1-10V Version HBTD8200V/F
0/1-10V
L
LED
N
LED
– +
0/1-10V
L L N S1 S2
S1 S2
DA L L N S1 S2
L
DA
N
LED LED
– +
0/1-10V
L L N S1 S2
L
0/1-10V
N
LED
LED
Subject to change without notice.
Edition: 21 Jun. 2021 Ver. A1 Page 3/5
Trailing Edge Version (150VA) HBTD8200T/F
L N S1 S2 L N
L N S1 S2
On/off Version HBTD8200S/F
L L N S1 S2
L N
S1 S2
L L N S1 S2
Subject to change without notice.
Edition: 21 Jun. 2021 Ver. A1 Page 4/5
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.
Switch Function Push switch Simulate sensor
Action Short press (<1 second) * Short press has to be longer than
0.1s, or it will be invalid.
Double push
Long press (1 second)
/
Descriptions
– Turn on/off – Turn on only – Turn off only
– Recall a scene – Exit manual mode – Do nothing
– Turn on only – Turn off only – Recall a scene
– Exit manual mode – Do nothing
– Dimming – Colour tuning – Do nothing
– Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
Additional Information / Documents
1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 21 Jun. 2021 Ver. A1 Page 5/5
Catalogue_Hytronik
iot.koolmesh.com
