WHLVD Ligature Resistant Linear Drain for Vinyl Floor
Product Information
The WHLVD Ligature Resistant Linear Drain is a product
manufactured by Whitehall MFG. It is designed for use with vinyl
flooring and provides a secure and efficient drainage system. The
drain consists of a Clamping Collar, Drain Body Assembly, and Drain
Grate.
Features:
- Ligature resistant design
- Compatible with vinyl flooring
- Adjustable height legs for flexible installation
- 2 IPS drain outlet
- No-hub waste connection
- Durable construction
Specifications:
- Maximum height: 4-7/8 inches
- Minimum height: 2-7/8 inches
- Maximum material thickness for vinyl flooring: 0.078 inches (2
mm)
Package Contents:
- Clamping Collar
- Drain Body Assembly
- Drain Grate
- Fasteners
Product Usage Instructions
- Remove the Drain Grate and Clamping Collar from the package and
set them aside for later installation. - Prior to pouring the concrete floor slab or constructing an
alternate flooring structure, position the Drain Body Assembly at
the desired location on top of the sub-floor structure. Align it
with the 2 IPS Drainpipe. - Adjust the height of the Drain Body using the Adjustable Height
Legs. Position the unit so that the top of the Drain Body Flange
will be level with the to-be-poured or other flooring structure.
The Adjustable Height Legs can be flipped to allow for a maximum
height of 4-7/8 inches or a minimum height of 2-7/8 inches. - Make up the 2 IPS No-Hub Waste Connection using an appropriate
Band Coupling to ensure a leak-free connection. - Pour the concrete slab floor or complete the construction of
the alternate flooring structure. - Prepare the unfinished floor as required to receive the vinyl
flooring. Ensure an even surface with the proper slope towards the
Drain, following industry standards of practice. - Lay the vinyl flooring in place. If desired, apply adhesive to
a portion of the flooring on the sides of the Drain to help keep it
in place. The maximum material thickness for the vinyl flooring
should not exceed 0.078 inches (2 mm). - Rough cut the vinyl flooring to help locate the interior of the
drain cavity. Do not cut the flooring to fit; leave adequate
flooring to hang over the drain cavity. - Complete the installation of the vinyl flooring by applying
adhesive up to the outer edge of the Drain Body Flange. - Locate the rough cut opening and carefully cut the vinyl over
the Linear Drain to align with the inside edge of the interior
Drain Body cavity using a vinyl knife. - Install the Clamping Collar by positioning it over the Drain
Body and vinyl flooring edge. Screw the Clamping Collar to the
Drain Body using the provided Fasteners. Tighten the bolts from
inside to out, alternating sides, and repeating the process until
all bolts are tight. Do not over-tighten. - Install the Drain Grate by positioning it into or inside the
Clamping Collar. Screw the Grate to the Clamping Collar using the
provided Screws. - To prevent lifting of the vinyl, sandbag the Drain and
vinyl.
INSTALLATION, OPERATION & MAINTENANCE MANUAL WHLVD
WHITEHALL MFG MODEL WHLVD LIGATURE RESISTANT LINEAR DRAIN FOR VINYL FLOOR
Clamping Collar
Drain Body Assembly
Drain Grate
Details listed below for installation of Vinyl Flooring are provided as reference only. Installer shall follow Industry Standards of Practice which are best suited for the site conditions and materials being used.
1Remove Drain Grate and Clamping Collar. Set aside for later installation.
2Prior to pouring concrete floor slab or constructing alternate flooring structure: Position Drain Body Assembly at desired location atop “sub-floor structure” and aligned with 2″ IPS Drainpipe.
2″ IPS Drain Outlet
Top of Drain Body Flange
Drain Pipe
Band Coupling (By Others)
3Adjust Drain Body height: Using Adjustable
Height Legs, position Drain Body Flange Concrete Slab Floor
unit so that the Top of will be level with the to be poured or other
387″
flooring structure.
IMPORTANT: Adjustable Height Legs may be flipped to allow either maximum height of 4-7/8″ or minimum height of 2-7/8″.
487″ MAX 287″ MIN
1
6900-224-001
WHITEHALL MANUFACTURING · P.O. BOX 3527 · City of Industry, CA 91744-0527 U.S.A Phone (800) 782-7706 · (626) 968-6681 · Fax (626) 855-4862 · Web: www.whitehallmfg.com
REV B: 02/03/23
INSTALLATION, OPERATION & MAINTENANCE MANUAL WHLVD
WHITEHALL MFG MODEL WHLVD LIGATURE RESISTANT LINEAR DRAIN FOR VINYL FLOOR
Drain Body
4Make up 2″ IPS (2-3/8″ OD) No-Hub Waste Connection: Use appropriate Band Coupling (Provided By Others) to ensure connection does not leak.
5Pour concrete slab floor or complete construction of alternate flooring structure.
Concrete
6Prep unfinished floor as required to receive vinyl flooring: Using industry standards of practice, ensure an even surface with proper slope to Drain.
7Lay the vinyl flooring in place: *If desired to help keep the flooring in place, apply adhesive to a portion of the flooring on the sides of the Drain.
Vinyl
*Maximum material thickness is 0.078″ [2 mm].
8Locate the Drain Body beneath the vinyl: “Rough cut” the vinyl flooring to help locate the interior of the drain cavity. IMPORTANT: Do not cut to fit; leave adequate flooring to hang over the drain cavity.
STEP 8
Clamping Collar
STEP 10
9Complete installation of vinyl flooring: Apply adhesive up to the outer edge of the Drain Body Flange.
Vinyl
10 Complete the Final Drain opening cutout: Locate the rough cut opening. Using a vinyl knife. Carefully cut the vinyl over the Linear Drain to align with the inside edge of the interior Drain Body cavity.
Interior of Drain Cavity
Drain Body Flange
2
6900-224-001
WHITEHALL MANUFACTURING · P.O. BOX 3527 · City of Industry, CA 91744-0527 U.S.A Phone (800) 782-7706 · (626) 968-6681 · Fax (626) 855-4862 · Web: www.whitehallmfg.com
REV B: 02/03/23
INSTALLATION, OPERATION & MAINTENANCE MANUAL WHLVD
WHITEHALL MFG MODEL WHLVD LIGATURE RESISTANT LINEAR DRAIN FOR VINYL FLOOR
Clamping Collar
Hex Head Screw
11Install Clamping Collar: Position Clamping Collar over Drain Body and vinyl flooring edge. Screw Clamping Collar to Drain Body using the Fasteners provided.
*TIP: USING A SOCKET WRENCH, TIGHTEN BOLTS FROM INSIDE TO OUT, ALTERNATING SIDES AND REPEATING THE PROCESS UNTIL ALL BOLTS ARE TIGHT. DO NOT OVER TIGHTEN.
Drain Body with Prepared Vinyl Flooring
12 Install Drain Grate: Position Drain Grate [“into” or “inside”] the Clamping Collar and screw Grate to Clamping Collar using Screws provided.
Fasteners
Drain Grate
Clamping Collar
13 Sandbag Drain and vinyl to prevent lifting of vinyl.
3
6900-224-001
WHITEHALL MANUFACTURING · P.O. BOX 3527 · City of Industry, CA 91744-0527 U.S.A Phone (800) 782-7706 · (626) 968-6681 · Fax (626) 855-4862 · Web: www.whitehallmfg.com
REV B: 02/03/23
Healthcare Products with Universal Design - Whitehall Mfg
