101240 Winch Mount Receiver
Product Information:
The Universal 2 Upper Receiver – Bolt-On is a component designed
to fit any standard four-hole winch mount without a fairlead
flange. It has a bolt-up pattern of 3 x 4 7/8 inches. The product
is compatible with the Winch Mount Receiver – PART # 101240
Hardware Kit: HK-001.
The kit includes the following components:
- 1 Universal 2 Upper Receiver (Bolt-On)
- 4 5/16-18 x 1 Bolts
- 4 5/16 SAE Flat Washers
- 4 5/16-18 Nylock Nuts
Product Usage Instructions:
- Place the Universal 2 Upper Receiver on the mount and align the
holes. - Insert the 5/16 x 1 Bolts through the holes in the receiver
plate and the mount (refer to Figure 2). - Put a 5/16 Flat Washer and a 5/16-18 Nylock Nut onto each
bolt. - Tighten the hardware securely.
Note: Please refer to Figure 1 (Exploded View)
for a visual representation of the product placement on a Mule Pro
FXT (this is just an example).
Universal 2″ Upper Receiver – Bolt-On
Note: Receiver will fit any standard four hole winch mount without fairlead flange (3″ x 4 7/8″ Bolt-Up pattern).
Winch Mount Receiver – PART # 101240 Hardware Kit: HK-001
Kit Components:
Qty.
Part Description
1…………….. REC – Universal 2″ Upper (Bolt-On) 4…………….. 5/16″-18 x 1″ Bolt 4…………….. 5/16″ SAE Flat Washer 4…………….. 5/16″-18 Nylock Nut
INSTALLATION INSTRUCTIONS:
1. Place Receiver on mount and line up holes. 2. Place 5/16″ x 1″ Bolts through holes in
receiver plate and mount (Figure 2). 3. Place 5/16″ Flat Washer and 5/16″-18 Nylock Nut on
the bolt and tighten hardware.
Notes:
“Figure 1” Exploded View
©2015 Copyright Kappers Fabricating, Inc. All rights reserved
“Figure 2”
(EXAMPLE: Placement on Mule Pro FXT)
1
