100795 Winch Mount
Product Information
| Item # | Qty. | Description |
|---|---|---|
| 1 | 1 | Rear Mount |
| 2 | 1 | Front Mount |
| 3.1 | 2 | HK-046 |
| 3.2 | 2 | 3/8-16 X 1.00 Hex Bolt GR5 |
| 3.3 | 2 | M8-1.25 X 25 Hex Bolt Flange GR8.8 |
| 3.4 | 2 | 5/16-18 X .75 Hex Bolt Flange GR5 Serrated |
| 3.5 | 2 | 3/8 Flat Washer SAE |
| 3.6 | 2 | 5/16 Flat Washer SAE |
| 3.7 | 2 | 5/16 Lock Washer |
| 3.8 | 2 | 3/8 Hex Nut Nylock |
| 100795 | – | Installation Instructions (Part #100795) |
Product Usage Instructions
- Remove the 4 bolts (A) and bumper cover shown in Figure 2.
- Place the Rear Mount (1) between the frame and bumper as shown
in Figure 3. Use bolts (3.3), washers (3.5), lock washers (3.6),
and nuts (3.8) as shown in Figure 1 & 3. Do not tighten. - Place the Front Mount (2) in front of the bumper as shown in
Figure 4. Use bolts (3.2) to secure the mount. - Install the Fairlead onto mounts (1 & 2) using bolts (3.1),
washers (3.4), and nuts (3.7) as shown in Figure 1. - Tighten all hardware completely.
- Mount the winch using the manual provided with the winch.
- Reinstall the bumper cover removed in step 1, using bolts (A)
as shown in Figure 2.
Note: Make sure all hardware needed to complete this mount is in
the package. Thoroughly read through and understand the
instructions before installing.
Date: 06/15/23
ARCTIC-CAT 350/366/425
Winch Mount
Kit Components:
Item #
1 2 3
3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8
Qty.
1 1 1 2 2 2 2 2 2 2 2
Description
Rear Mount Front Mount HK-046 3/8″-16 X 1.00 Hex Bolt GR5 M8-1.25 X 25 Hex Bolt Flange GR8.8 5/16″-18 X .75 Hex Bolt Flange GR5 Serrated 3/8″ Flat Washer SAE 5/16″ Flat Washer SAE 5/16″ Lock Washer 3/8″ Hex Nut Nylock 5/16-18 Hex Nut GR5
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
Installation Instructions
PART #100795
Figure 1 Fairlead
3.4 3.1
3.7 3.2
Figure 2
21
3.8
A
1. Remove the 4 bolts (A) and bumper cover shown in Figure 2.
Figure 3
2. Place Rear Bracket (1) between frame and bumper as shown in
Figure 3. Use bolts (3.3), washers (3.5), lock washers (3.6), and nuts (3.8) as shown in Figure 1 & 3. Do Not Tighten.
1
3. Place the front mount (2) in front of the bumper as shown in
3.3
Figure 4. Use bolts (3.2) to secure the mount.
4. Install Fairlead onto mounts (1 & 2) using bolts 3.1, washers (3.4), and nuts (3.7) as shown in Figure 1.
5. Tighten all hardware completely.
6. Mount the winch using the manual provided with the winch.
Figure 4
7. Reinstall bumper cover removed in step 1, using bolts (A) as
2
shown in Figure 2.
3.5 3.3 3.6
3.2
©2023 Copyright Kappers Fabricating, Inc. All rights reserved
06/15/23
