ZWE-ZSZ-01ZWE-ZSZ-03 Standing Desk Converter
Product Information
The Desk Converter is a versatile tool designed to provide users
with a convenient and ergonomic workspace. It allows users to
convert their existing desk into a standing desk, promoting better
posture and reducing the negative effects of prolonged sitting. The
Desk Converter comes in two models: ZWE-ZSZ-01 and ZWE-ZSZ-03. It
is made of high-quality steel and board, ensuring durability and
stability. The black color adds a sleek and modern touch to any
workspace. The product dimensions and weight for each model are as
follows:
- ZWE-ZSZ-01:
- Main Material: Steel + Board
- Color: Black
- Product Dimensions (LxWxH): 800*635*505 mm
- Packing Size (LxWxH): 875*500*155 mm
- Net Weight: 10.85 kg
- Gross Weight: 11.80 kg
- ZWE-ZSZ-03:
- Main Material: Steel + Board
- Color: Black
- Product Dimensions (LxWxH): 915*756*505 mm
- Packing Size (LxWxH): 980*700*160 mm
- Net Weight: 13.75 kg
- Gross Weight: 14.9 kg
Product Usage Instructions
- Read the Manual: Before using the Desk
Converter, carefully read the user manual provided. This manual
contains important safety instructions and guidelines for proper
usage. - Assembly Precautions: Follow the assembly
precautions listed in the manual to ensure safe and correct
installation of the Desk Converter. - Use Precautions: To prevent serious injury or
damage, adhere to the following use precautions:- Do not allow children to play with or approach the Desk
Converter as it is not a toy. - Use the Desk Converter only as intended. Do not sit or stand on
the table. - Inspect the Desk Converter before every use. If any parts are
loose or damaged, do not use it. - Place the Desk Converter on a flat, level, and hard surface for
stability.
- Do not allow children to play with or approach the Desk
- Assembly Instructions: Follow the assembly
instructions provided in the manual. Refer to the assembly diagram
for additional information about the parts. - Release Handle: When unpacking the Desk
Converter, do not press the release handle. Only press the release
handle when the Desk Converter is in an upright position. - Completion: Once assembled, ensure that all
parts are securely in place and that the Desk Converter is properly
set up for use.
If you have any further questions or need technical support,
please feel free to contact us at [email protected]. For
warranty information and technical support, visit our website at
https://www.vevor.com/support.
Please note that VEVOR reserves the right to interpret the user
manual and any updates or changes to the product will not be
notified unless specified.
Address:
Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO
CUCAMONGA, California, 91730 United States of America
SHUNSHUN GmbH
Linkenheim-Hochstetten, Germany
Technical Support and E-Warranty Certificate https://www.vevor.com/support
DESK CONVERTER USER MANUAL
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Desk Converter
MODEL NO.: ZWE-ZSZ-01ZWE-ZSZ-03
NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us:
[email protected] This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
1
WARNING: Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL Check carefully to make sure there are no missing or defective parts, mproper installation macause damage or serious injury. Do not use this product for any purpose that is not explicitlyspecified in this manual and do not exceed weight capacity. We cannot be liable for damage orinjury caused by improper mounting, incorrect assembly, or inappropriate use.
PINCH POINT DO NOT place hands on or near support bars.Moving parts can crush and cut.Pinch points arecreated during lifting and lowering the worksurfaceFailure to follow these instructions may result inserious personal injury.
ASSEMBLY PRECAUTIONS
1.Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3.Keep assembly area clean and well-lit. 4.Keep bystanders out of the area during assembly. 5.Do not assemble when tired or when under the influence of alcohol, drugs or medication. 6.The product capabilities apply to properly and completely assembled products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the acrylic table.
2
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING: 1. This product is not a toy. Do not allow children to play with or approach this item. 2. Use as intended only. Do not sit or stand on the table. 3. Inspect before every use. Do not use it if parts are loose or damaged. 4. Use only on flat, level, and hard surfaces.
3
ASSEMBLY INSTRUCTIONS
For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.
TECHNICAL SPECIFICATIONS
Model Main Material
Color Product Dimensions
(LxWxH) Packing Size
(LxWxH) Net Weight (kg) Gross Weight (kg)
ZWE-ZSZ-01 Steel + Board
Black
800*635*505 mm
875*500*155 mm
10.85 11.80
ZWE-ZSZ-03 Steel + Board
Black
915*756*505 mm
980*700*160 mm
13.75 14.9
PACKAGE CONTENTS
4
STEP1
ASSEMBLY STEPS
STEP2
STEP3
Do not press the release handle while in thepackage. Only press the release handle in anupright position.
5
STEP4
COMPLETION
6
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA, California, 91730 United States of America
SHUNSHUN GmbH
EC REP Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten,Germany
UK
REP
Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom
7
Support and E-Warranty Certificate https://www.vevor.com/support
vevor.com/support
