DESK-V000K K Series Standing Desk Converter
Desk Riser
The Desk Riser is a product designed to provide an adjustable
work surface for your computer, monitor, and other office
equipment. It comes with a keyboard tray, stopper, pads, rubber
feet, cable clips, screws, and tools required for assembly.
Package Contents
- A (x1) Desk
- B (x1) Keyboard Tray
- C (x1) Stopper
- D (x3) Pad
- E (x4) Rubber Feet
- F (x2) Cable Clip
- S-A (x2) ST4.2x12mm Screw
- S-B (x4) M5x10mm Screw
Tools Required
- Scissors
- Phillips Screwdriver
Warning and Weight Capacity
The Desk Riser has a weight capacity limit of 33lbs (15kg) for
the desktop and 4.4lbs (2kg) for the keyboard tray. Do not exceed
the weight capacity as it may result in serious injury. The product
also has moving parts that can crush and cut, creating pinch points
during lifting and lowering the work surface. Keep your hands away
from support bars to avoid injury.
Assembly Steps
- Apply Pads (D) to the underside of Keyboard Tray (B). Assemble
Stopper (C) to Keyboard Tray (B) using ST4.2x12mm Screws (S-A) and
a Phillips screwdriver. - Install Rubber Feet (E) to the bottom of Desk (A). Cut the
large shipping tie, but do not squeeze the handle on Desk (A) while
cutting. - Raise Desk (A) by lifting the handle on the right side of the
frame. - Place Keyboard Tray (B) on the metal brackets on Desk (A).
Secure Keyboard Tray (B) to brackets using M5x10mm Screws (S-B) and
tighten with a Phillips screwdriver. - Apply Cable Clips (F) to underside of Desk (A).
- If installing a monitor mount, remove the plug from the
desktop, then secure the mount using grommet mounting hardware
included with your monitor mount. Keep monitor and laptop base
fully on the desktop. Follow the cable routing instructions to
avoid potential cable pinching. Leave enough slack in cable to
allow for full range of vertical motion (15 / 38 cm). Raise desktop
slowly to keep items stable.
Contact Information
If any parts are received damaged or defective, contact the
dedicated support team at [email protected] or call 309-278-5303 for
immediate assistance during office hours from Monday to Friday
7:00am – 7:00pm CST. You can also chat live with an agent on their
website www.vivo-us.com.
For more VIVO products, visit their website at
www.vivo-us.com.
Desk Riser
Instruction Manual
SKU: DESK-V000K/KA/KF/KG/KN/KO/KR/KW
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000k
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Desk
B (x1) Keyboard Tray
C (x1) Stopper
D (x3) Pad
E (x4) Rubber Feet
F (x2) Cable Clip
S-A (x2) ST4.2x12mm Screw
S-B (x4) M5x10mm Screw
TOOLS NEEDED
Scissors
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33lbs (15kg) DESKTOP
4.4lbs (2kg) KEYBOARD TRAY
WARNING: PINCH POINT
DO NOT place hands on or near support bars. Moving parts can crush and cut. Pinch points are created during lifting and lowering the work surface. Failure to follow these instructions may result in serious personal injury.
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B). Assemble Stopper (C) to Kayboard Tray (B) using ST4.2x12mm Screws (S-A) and a Phillips screwdriver.
D
B
C
S-A
STEP 2
Install Rubber Feet (E)
to the bottom of Desk (A). Then cut the large
A
shipping tie.
NOTE: DO NOT squeeze
the handle on Desk
(A) while cutting the
shipping tie.
E
2
STEP 3
Raise Desk (A) by lifting the handle on the right side of the frame.
STEP 4
Place Keyboard Tray (B) on the metal brackets on Desk (A). Secure Keyboard Tray (B) to brackets using M5x10mm Screws (S-B) and tighten with a Phillips screwdriver.
S-B A
B
STEP 5
Apply Cable Clips (F) to underside of Desk (A).
A F
STEP 6
If installing a monitor mount, remove the plug from the desktop, then secure the mount using grommet mounting hardware included with your monitor mount.
CAUTION!
Keep monitor and laptop base fully on
the desktop.
Follow the cable routing instructions to avoid the potential to
pinch cables.
Leave enough slack in cable to allow for full range of vertical motion (15″ / 38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury. 3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 02/8/2023 REV3.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
K Series Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
