DESK-V000KL 38 Inch Corner Desk Riser
Product Information
| Product Name | 38 Corner Desk Riser |
|---|---|
| SKU | DESK-V000KL/LA/LN/LW |
| Manufacturer | VIVO |
| Website | https://vivo-us.com/products/desk-v000kl |
| Contact Information | Phone: 309-278-5303 Email: [email protected] Website: https://vivo-us.com |
Product Usage Instructions
- Apply Pads (D) to the underside of the Keyboard Tray (B).
- Install Stopper (F) to the underside of the Keyboard Tray (B)
using ST4.2x12mm Screws (S-B) and a Phillips screwdriver. - Press Foot Pads (E) into the holes in the base of the Desk
(A). - Cut the large plastic ties on the bottom of the Desk (A).
CAUTION: Do not squeeze the release handle with the desk in a
sideways or upside-down position. - Place Desk (A) right-side up on a table. Raise the desk by
squeezing the handle underneath the desktop. - Place Keyboard Tray (B) on the metal brackets on Desk (A).
Secure the keyboard tray to the brackets using M5x10mm Screws (S-A)
and a Phillips screwdriver. - Apply Cable Clips (C) to the underside of the desk
assembly. - Place the monitor and accessories on the desk assembly to begin
using.
Grommet Installation:
If installing a grommet compatible monitor mount, remove the
plastic cap from the rear-center of the desktop. Install the mount
to the open hole according to the mount’s directions.
Important Usage Guidelines:
- Keep the monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid potential cable
pinching. - Leave enough slack in the cable to allow for full range of
vertical motion (15 / 38 cm). - Raise the desktop slowly to keep items stable.
Please contact our dedicated support team at 309-278-5303 or
email [email protected] if you have any questions or require
assistance. We are available Monday to Friday from 7:00am-7:00pm
CST.
38″ Corner Desk Riser
Instruction Manual
SKU: DESK-V000KL/LA/LN/LW
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000kl
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
A (x1) Desk
B (x1) Keyboard Tray
C (x2) Cable Clip
D (x3) Foam Pad
E (x4) Foot Pad
F (x1) Stopper
S-A (x4) M5x10mm
Screw
S-B (x2) ST4.2x12mm
Screw
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Scissors
Phillips Screwdriver
33 lbs (15kg)
Desk
4.4lbs (2kg)
Keyboard Tray
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B).
D
B
STEP 2
Install Stopper (F) to underside of Keyboard Tray (B) using ST4.2x12mm Screws (S-B) and a Phillips screwdriver.
S-B B
F
STEP 3
Press Foot Pads (E) into holes in base of Desk (A). A
E
2
3
STEP 4
Cut the large plastic ties on bottom of Desk (A). CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position.
A
STEP 5
Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop.
A
STEP 6
Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using M5x10mm Screws (S-A) and a Phillips screwdriver.
A S-A
B
STEP 7
Apply Cable Clips (C) to underside of desk assembly.
C
4
5
STEP 8
Place monitor and accessories on desk assembly to begin using.
Grommet Installation
If installing a grommet compatible monitor mount, remove the plastic cap from the rear-center of the desktop. Install the mount to the open hole according to the mount’s directions.
CAUTION!
Keep monitor and laptop base fully on
the desktop.
Follow the cable routing instructions to avoid the potential to
pinch cables.
Leave enough slack in cable to allow for full range of vertical motion (15″ / 38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
6
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 03/21/2023 REV4.2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
38" Corner Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
