V I V O Desk-v001g Black 25 Inch Desk Riser Instruction Manual (+ PDF)

Contents hide

DESK-V001G Black 25 Inch Desk Riser

Product Information

The Black 25 Desk Riser (SKU: DESK-V001G) is a desk riser that
can be used to elevate your monitor and keyboard to a comfortable
height. The product comes with a desk (A), a keyboard tray (C), a
keyboard tray bracket (B), M5x12mm screws (D), M6x16mm screws (E),
and a Phillips screwdriver. The product has a weight capacity of
17.6 lbs (7.98kg) and comes with a warning for choking hazard due
to small parts. The product is available on vivo-us.com and comes
with helpful videos and specifications related to this product.

Product Usage Instructions

Carefully remove the desk and contents from the packaging and
place them on a flat surface. Ensure that the desk (A) is
raised.
Attach the Keyboard Tray Bracket (B) to the Desk (A) using
M6x16mm Screws (E) and tighten them with a Phillips
screwdriver.
Mount the Keyboard Tray (C) to the Keyboard Tray Bracket (B)
using M5x12mm Screws (D).
Squeeze the handle on the right side, then raise or lower Desk
(A) to the desired height.
Place items on Desk (A) as desired. Ensure that you do not
exceed the weight limit of 17.6 lbs.
If the lock is not releasing properly to change desk height,
adjust the position of the black tube containing the steel release
cable. Turn the nuts at the end of the tube just behind the handle,
moving the tube away from the handle until the cable has proper
tension, then tighten the nuts.

Ensure that you keep your monitor and laptop base fully on the
desktop. Follow the cable routing instructions to avoid the
potential to pinch cables. Leave enough slack in the cable to allow
for full range of vertical motion (16 / 41 cm). Raise the desktop
slowly to keep items stable. Failure to follow these instructions
may result in property damage and/or personal injury.

If any parts are received damaged or defective, please contact
the support team at [email protected] or call 309-278-5303. The
support team is available from Monday – Friday 7:00am – 7:00pm CST
and can offer immediate assistance with rapid response times.

View Fullscreen

Black 25″ Desk Riser
Instruction Manual

SKU: DESK-V001G
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v001g GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

[email protected]

www.vivo-us.com Chat live with an agent!

309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS

A (x1) Desk

B (x1) Keyboard Tray
Bracket

TOOLS NEEDED

C (x1) Keyboard Tray

D (x4)

E (x4)

M5x12mm Screw M6x16mm Screw

Phillips Screwdriver

DO NOT EXCEED WEIGHT CAPACITY. 17.6 lbs

Failure to do so may result in serious injury.

(7.98kg)

ASSEMBLY STEPS
STEP 1
Carefully remove desk and contents from packaging and place on flat surface. Desk (A) must be raised.
A

STEP 2
Attach Keyboard Tray Bracket (B) to Desk (A) with M6x16mm Screws (E), and tighten with a Phillips screwdriver.
A
E

STEP 3
Mount Keyboard Tray (C) to Keyboard Tray Bracket (B) using M5x12mm Screws (D).

STEP 4
Squeeze the handle on the right side, then raise or lower Desk (A) to desired height.

C A
B
D

STEP 5
Place items on Desk (A) as desired. Please do not exceed weight limit of 17.6 lbs.
A

STEP 6
If lock is not releasing properly to change desk height, adjust the position of the black tube containing the steel release cable. Turn the nuts at the end of the tube just behind the handle as shown below, moving the tube away from the handle until the cable once again has proper tension, then tighten the nuts.

CAUTION!

Keep monitor and laptop base fully on
the desktop.

Follow the cable routing instructions to avoid the potential to
pinch cables.

Leave enough slack in cable to allow for full range of vertical motion (16″ / 41 cm).

Raise desktop slowly to keep items stable.

Failure to follow these instructions may result in property damage and/or personal injury.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

LAST UPDATED: 08/02/2022 REV2

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303

AVG. RESOLUTION TIME (within office hrs): 5M 4S

www.vivo-us.com
Chat live with an agent!

AVG. RESOLUTION TIME (within office hrs): < 15 M

[email protected]

AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com