DESK-V000KL Desk Converter
Product Information
The Black Corner Desk Riser (SKU: DESK-V000KL) is a desk
accessory designed to increase workspace and promote a healthy work
environment. The desk riser comes with a keyboard tray, cable
clips, foam pads, and foot pads. The desk riser has a weight
capacity of 33 lbs (15kg), and the keyboard tray weighs 4.4lbs
(2kg). The desk riser is not suitable for children under 3 years of
age.
Product Usage Instructions
- Unpack the package contents and ensure all parts are
present. - Separate the Sleeve Nut with Screw (S-A) into Sleeve Nut (S-A1)
and Screw (S-A2). - Apply Foam Pads (D) to the underside of the Keyboard Tray (B).
Press Sleeve Nuts (S-A1) into the holes on top of the Keyboard Tray
(B). - Press Foot Pads (E) into the holes in the base of the Desk (A).
Cut the large plastic ties on the bottom of the Desk (A). - Place Desk (A) right-side up on a table. Raise the desk by
squeezing the handle underneath the desktop. - Place Keyboard Tray (B) on metal brackets on Desk (A). Secure
keyboard tray to brackets using Screws (S-A2) and a Phillips
screwdriver. - Apply Cable Clips (C) to the underside of the desk
assembly. - If installing a grommet compatible monitor mount, remove the
plastic cap from the rear-center of the desktop. Install the mount
to the open hole according to the mount’s directions. - Follow the cable routing instructions to avoid the potential to
pinch cables. Leave enough slack in the cable to allow for full
range of vertical motion (15 / 38 cm). Raise the desktop slowly to
keep items stable.
It is important not to exceed the weight capacity of the desk
riser. Failure to do so may result in serious injury. Keep the
monitor and laptop base fully on the desktop. Failure to follow
usage instructions may result in property damage and/or personal
injury. If any parts are received damaged or defective, please
contact the manufacturer for replacement parts.
Black Corner Desk Riser
Instruction Manual
SKU: DESK-V000KL
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000kl GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
A (x1) Desk
B (x1) Keyboard Tray
TOOLS NEEDED
C (x2) Cable Clip
D (x3) Foam Pad
E (x4) Foot Pad
S-A (x4) Sleeve Nut with
Screw
Scissors
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33 lbs (15kg)
Desk
4.4lbs (2kg)
Keyboard Tray
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Separate Sleeve Nut with Screw (S-A) into Sleeve Nut (S-A1) and Screw (S-A2).
S-A
S-A1 S-A2
STEP 2
Apply Pads (D) to underside of Keyboard Tray (B). Press Sleeve Nuts (S-A1) into holes on top of Keyboard Tray (B).
S-A1 D
B
STEP 3
Press Foot Pads (E) into holes in base
of Desk (A). Cut the large plastic ties on
bottom of Desk (A).
A
CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position.
E
2
STEP 4
Place Desk (A) right-side up on a table.
Raise the desk by squeezing the handle underneath the desktop.
A
Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using Screws (S-A2) and a Phillips screwdriver.
A S-A2
B Apply Cable Clips (C) to underside of desk assembly.
C
Grommet Mount
If installing a grommet compatible monitor mount, remove the plastic cap from the rear-center of the desktop. Install the mount to the open hole according to the mount’s directions.
CAUTION!
Keep monitor and laptop base fully on
the desktop.
Follow the cable routing instructions to avoid the potential to
pinch cables.
Leave enough slack in cable to allow for full range of vertical motion (15″ / 38 cm).
Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury. 3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED:08/08/2022 REV3
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
38" Corner Standing Desk Converter – VIVO - desk solutions, screen mounting, and more
