14202 Ferris Black Outdoor Porch Lantern Wall Sconce Light Fixture for Exterior
Product Information
The Ferris Wall Fixture is a light fixture designed for
residential use. It is a wall-mounted fixture that provides
illumination to any indoor space. The fixture comes with a lifetime
warranty and is manufactured by Nathan James.
Product Specifications
- SKU: 14202
- Estimated assembly time: 15 minutes
- Do not use a drill during assembly
What’s Included
The package includes the following items:
- 1 Fixture
- 2 M4*26mm Screws (A Junction Box)
- 1 Mounting Plate (B)
- 2 Rubber Washers (C)
- 2 M4*12mm Screws (D)
- 3 Wire Nuts (E)
Safety Instructions
Safe use of this product is important. Please follow these
safety guidelines:
- Do not modify the structure of the product.
- Inspect the product upon receipt and before each use.
- Use the light fixture responsibly and with primary concern for
safety. - Nathan James and its parent companies are not responsible for
injuries or death resulting from failure to follow instructions or
improper use of the product. - Do not use the product for commercial purposes.
- Do not use the light fixture if it is damaged.
- Do not leave spilled liquid on the fixture.
- Make permanent repairs if the fixture is damaged.
- Inspect the wire insulation for any cuts, abrasions, or exposed
copper before installation. - Disconnect the power before starting the installation.
Product Usage Instructions
Pre-Installation
Step 1: Separate the Mounting Plate (B) from
the Fixture by removing Screws (D) from the side of the back
plate.
Step 2: Install the Mounting Plate (B) to your
pre-existing Electrical Box. Ensure that you are connecting to a
120V AC 60Hz circuit. If you don’t have a pre-existing electrical
box, it is recommended to consult a certified electrician.
Step 3: Wrap the ground wire from the fixture
around the grounding screw on the Mounting Bracket (B).
Installation
Step 4: Join the matching colored wires
(Black-Hot and White-Neutral) with the Wire Nuts (E). Tuck any
excess wire into the electrical box.
Step 5: Using the Screws provided, mount the
Fixture (1) to the Mounting Bracket (B). Ensure that all excess
wire is tucked into the electrical box.
Note: It is important not to tighten bolts or screws completely
until all bolts or screws are lined up and inserted into holes. Use
hand tools for assembly and avoid over-tightening to prevent
stripping.
Let’s build the
Ferris Wall Fixture
SKU 14202
MINUT
15
SSEMBL
1 5 Y
E A
Scan me!
Inspiration Digital Instructions Free Lifetime Warranty
22-0527
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
15:00
What you need · Your favorite snack or energy bar
(Save the bubbly for once your fixture is safely installed!) · Use the packaging carton as a working surface to prevent product damage during assembly
Do not use a drill
What’s included
Description
Qty
1 Fixture
1
A Junction Box M4*26mm Screws
2
B Mounting Plate
1
C Rubber Washer
2
D M4*12mm Screws
2
E Wire Nuts
3
Toll-free at 1-866-619-1004 [email protected] Nathanjames.com/help
Scan me!
Inspiration Digital Instructions Free Lifetime Warranty
2
Safety first, fun later
Safe use of this product starts with you.
Do not modify the structure of this product in any way.
Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.
Proper use
DO NOT DO NOT DO NOT DO NOT
use for commercial purposes leave spilled liquid on fixture use light fixture if damaged make temporary repairs
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at [email protected] or 1-866-619-1004
WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock. PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
3
The goods
1
A
B
C
D
E
IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
4
Pre-Installation
· Read all instructions prior to beginning assembly. · To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. · Keep the receipt and these instructions for proof of purchase. · Use 2 Type T Bulbs or Type B bulbs (not included). · 120V 60Hz AC Only
Step 1
Separate Mounting Plate (B) from Fixture by removing Screws (D) from the side of the back plate.
C
B
D
1
5
Step 2
Install the Mounting Plate (B)
to your pre-existing Electrical
B
Box.
Note: Be sure that you are only
A
making the connections to a 120V
AC 60Hz circuit. If you do not
Electrical box
have a pre-existing electrical
box, we strongly advise using a
certified electrician.
Step 3
Wrap the ground wire from the fixture around the grounding screw on the Mounting Bracket (B).
Electrical box B
P.S. We aren’t judging you if you’ve already pulled out your snack. Ours was eaten by Step 2.
6
Step 4
Join matching colored wires
Black (Hot)
E
with Wire Nuts.
Begin tucking the excess wire into the electrical box.
Ground White (Neutral)
Step 5
Using the Screws, mount the Fixture (1) to the Mounting Bracket (B). Be sure that you have all of the excess wire tucked into the electrical box.
7
C D
1
Step 6
Last, but not least, screw in two bulbs (not included). We recommend B-10 bulbs.
Let there be light!
Troubleshooting
Problem
Possible Causes
The bulb will not light.
The bulb is burned out.
The power is off.
The fuse blows or circuit breaker blows when the light is turned on.
The circuit breaker is off. There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position. Discontinue use of the light. Contact a qualified electrician or reach out to our Customer Happiness team at [email protected] or 1-866-619-1004.
8
Questions? Don’t worry, we’ve got the answers
What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
Is this UL/ETL certified?
Yes, all our products are either UL or ETL.
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.
Is this light compatible outside North America? Our lighting is only warranted in Canada and the United States.
What do I do if the product is not working? Try a different light bulb and confirm proper installation.
Can these lights work on a dimmer? Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
Can I use the fixture outdoors? Yes, this product was designed to be used outdoors.
Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.
9
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at [email protected] we will issue you a free replacement with zero hassle.
Our way
Give us a call Replacement You
Their way
Re-package item Schedule pick up Track package Replacement You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
10
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004 [email protected] NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen–as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love! If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon
Founder, Nathan James
11
Support : Nathan James
Product Warranty | Nathan James
