This product is a wall lantern model 51390 that requires assembly
and installation. The product comes with a mounting unit, fixture,
E26 socket handle, glass, socket ring, rubber washer, mounting
screws, wire nuts, and cap nuts. The product requires tools such as
a ladder, safety glasses, electrical Phillips tape screwdriver,
flat blade screwdriver, pliers, and wire strippers for assembly and
installation. The product requires an E26 60W MAX bulb (not
included).

Product Usage Instructions:

Step 1:

Use the mounting screws to attach the mounting unit to the junction
box.

Step 2:

Make the electrical connection from the junction box to the
fixture. Connect the ground wire to the mounting unit using the
preinstalled green ground screw. Then, connect the positive,
negative and ground wires with the supplied wire nuts. Secure with
electrical tape.

Connect Clear, Brown, Gold, or Black Parallel Wire without
tracer (round & smooth) or Black Fixture Wire to: Black or Red
Supply Wire or Insulated Wire (other than green) with copper
conductor.
Connect Clear, Brown, Gold, or Black *Parallel Wire with tracer
(square & ridged) or White Fixture Wire to: White Supply Wire
or Insulated Wire (other than green) with silver conductor.

Step 3:

Secure the fixture to the mounting unit with the cap nuts. Place
the glass over the fixture and secure it with socket ring by E26
socket Handle. Install the bulb E26 60W MAX (not included). Note:
The parts shown may differ slightly per light fixture.

View Fullscreen

WALL LANTERN Assembly Instructions
Model 51390

CAUTION
· Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.

· Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED
Ladder

Safety glasses

Electrical Phillips

tape

screwdriver

Flat blade screwdriver

Pliers

Wire strippers

Fixture

E26 Socket Handle

Glass

Socket Ring

Rubber washer

Mounting Unit

Mounting Screws

Wire Nuts

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

Cap Nuts page 1

WALL LANTERN Assembly Instructions
Model 51390
STEP 1
Use the mounting screws to attach the mounting unit to the junction box

STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape

Connect Clear, Brown, Gold or Black Parallel Wire without tracer (round & smooth) or Black Fixture Wire to:
Black or Red Supply Wire or Insulated Wire (other than green) with copper conductor.

Connect Clear, Brown, Gold or Black *Parallel Wire with tracer (square & ridged) or White Fixture Wire to:
White Supply Wire or Insulated Wire (other than green) with silver conductor

Copper Smooth Silver Ridged

STEP 3
Secure the fixture to the mounting unit with the cap nuts;
Place the glass over the fixture and secure it with socket ring by E26 socket Handle; Install the bulb E26 60W MAX(not included).

page 2