DESK-AC07U Curved Desk Corner Connector
Product Information: Curved Desk Corner Connector
The Curved Desk Corner Connector is a product designed to
connect two desks at a corner angle. It comes with a Desk Sleeve
(A), M6 Spacer (S-A), M5x35mm Screw (S-B), M5x8mm Screw (S-C),
M6x8mm Screw (S-D), and M5 Washer (S-E). It also requires tools
such as a Phillips Screwdriver, Tape Measure, Drill, and Pencil for
assembly.
It is important to note that this product contains small parts
that may pose a choking hazard and is not recommended for children
under 3 years old. Adult supervision is required during
assembly.
Product Usage Instructions
- Place the Desk Sleeve (A) onto the desktop at the desired
location. Measure the space between the underside of the desktop
and the lower portion of the sleeve to determine the required
Spacers (S-A) and Washers (S-E) for mounting. Remove Desk Sleeve
(A) from the desktop. - Install your keyboard mount (not provided) to Desk Sleeve A
using either M5x8mm Screws (S-C) or M6x8mm Screws (S-D), depending
on the mount being installed. Tighten with a Phillips
screwdriver. - Attach Desk Sleeve (A) with the installed keyboard mount to the
desktop. Use Desk Sleeve (A) and a pencil to mark drilling
locations. Drill 10mm (.4) deep pilot holes in the desktop for
Curved Desk Sleeve and the rear end of the keyboard mount using a
3mm (1/8) drill bit. - Secure Desk Sleeve (A) and keyboard mount to the desk using
M5x35mm Screws (S-B) with M6 Spacers (S-A), and M5 Washers (S-E)
determined in Step One. Tighten with a Phillips screwdriver.
Note: The quantity of Spacers & Washers needed is determined
by the gap of space between desktop and bottom of Sleeve. The use
of one Spacer & Washer with each screw above is for visual aide
ONLY.
If you encounter any issues during assembly or receive any
damaged or defective parts, contact the VIVO support team at
[email protected] or 309-278-5303 for immediate assistance.
Curved Desk Corner Connector
Instruction Manual
SKU: DESK-AC07U
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-ac07u GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Desk Sleeve
S-A (x12) M6 Spacer
S-B (x4) M5x35mm Screw
S-C (x3) M5x8mm Screw
S-D (x2) M6x8mm Screw
S-E (x6) M5 Washer
TOOLS NEEDED
NOTE: SOME HARDWARE MAY NOT BE USED
Phillips Screwdriver
Tape Measure
Drill
Pencil
2
ASSEMBLY STEPS
STEP 1
Place Desk Sleeve (A) onto the desktop at the desired location. Measure the space between the underside of the desktop and the lower portion of the sleeve to determine the required Spacers (S-A) and Washers (S-E) for mounting. Remove Desk Sleeve (A) from the desktop.
A
STEP 2
Begin by installing your keyboard
mount (not provided) to Desk Sleeve
A
(A). Depending on the mount being
installed, use M5x8mm Screws (S-C) or
M6x8mm Screws (S-D) to secure mount to Desk Sleeve (A). Tighten with a Phillips screwdriver.
S-C S-D
STEP 3
Fit Desk Sleeve (A) with installed keyboard mount to the desktop. Use
Desk Sleeve (A) and a pencil to mark
DESKTOP
drilling locations. Drill 10mm (.4″) deep
pilot holes in the desktop for Curved
A
Desk Sleeve and the rear end of the keyboard mount using a 3mm (1/8″) drill bit.
STEP 4
Secure Desk Sleeve (A) and keyboard mount to the desk using M5x35mm Screws (S-B) with M6 Spacers (S-A), and M5 Washers (S-E) determined in Step One. Tighten with a Phillips screwdriver.
A
S-A
S-E
S-B
Note: the quanitity of Spacers & Washers needed is determined by the gap of space between desktop and bottom of Sleeve. The use of one Spacer & Washer with each screw above is for visual aide ONLY.
3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 06/14/2022 REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Curved Desk Corner Connector – VIVO - desk solutions, screen mounting, and more
