STAND-V101N Single Monitor Desk Mount with Extra Long Arm
Product Information
The Single Monitor Desk Mount with Extra Long Arm is designed to
securely hold a single monitor up to 22lbs (10kg) in weight. The
product includes an arm, clamp, pole, pole cap, grommet plate, arm
cable clip, support plate, pole cable clip, rubber pads, screws,
and wrenches. The mount can be installed using either a clamp or
grommet base, and the arm can be adjusted to achieve the desired
angle and height.
Product Usage Instructions
- Insert Pole Cap (D) into the top of Pole (C).
Option A: Clamp Installation
- Mount Pole (C) to Clamp (B) using M6x16mm Screws (S-A). Tighten
using 4mm Allen Wrench (T-A). - Apply the Rubber Pads (I) to the underside of Clamp (B), then
attach Clamp (B) to the desktop.
Option B: Grommet Base Installation
- Separate Clamp (B) by removing the screws in back with 4mm
Allen Wrench (T-A). - Remove the screw from the top of Clamp Bolt (B1), then remove
Clamp Bolt (B1). - Apply Rubber Pads (I) to the bottom of Grommet Base (E).
- Place Support Plate (G) onto Clamp Bolt (B1), then insert Clamp
Bolt (B1) through the grommet hole and thread into Pole (C) as
shown in the diagram.
- Mount Pole (C) to Clamp (B) using M6x16mm Screws (S-A). Tighten
- Slide Pole Cable Clip (H) and Arm (A) onto Pole (C). Secure Arm
(A) to Pole (C) using 5mm Allen Wrench (T-B). - Attach Arm Cable Clips (F) to Arm (A) as shown.
- Insert two screws (M-A or M-B) and M5 Washers (M-C) into the
top mounting holes of the monitor, making sure to leave 3mm of
thread exposed. Align screws in monitor over the slots in the VESA
plate. Secure using two more Screws (M-A or M-B) and M5 Washers
(M-C) in the bottom two holes of the monitor. Tighten all four
screws using a Phillips screwdriver. - Adjust the tilt joint using 6mm Allen Wrench (T-C).
- Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Pole
Cable Clip (H) for future adjustments. - Tighten the joints in Arm (A) using 8mm Allen Wrench (T-D) with
19mm Wrench (T-E) and 6mm Allen Wrench (T-C). - Route cables through Arm Cable Clips (F) and Pole Cable Clips
(H).
If any parts are received damaged or defective, please contact
the manufacturer’s support team for assistance.
Single Monitor Desk Mount with Extra Long Arm
Instruction Manual
SKU: STAND-V101N
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v101n
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Arm
B (x1) Clamp
C (x1) Pole
D (x1) Pole Cap
E (x1) Grommet Plate
F (x3) Arm Cable Clip
G (x1) Support Plate
H (x1) Pole Cable Clip
I (x5) Rubber Pad
S-A (x3) M6x16mm Screw
M-A (x4) M4x12mm Screw
M-B (x4) M5x12mm Screw
M-C (x4) M5 Washer
T-A (x1) 4mm Allen Wrench
T-B (x1)
T-C (x1)
T-D (x1)
5mm Allen Wrench 6mm Allen Wrench 8mm Allen Wrench
T-E (x1) 19mm Wrench
TOOLS NEEDED
NOTE: SOME HARDWARE MAY NOT BE USED
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
22lbs (10kg)
2
ASSEMBLY STEPS
STEP 1
Insert Pole Cap (D) into the top of Pole (C).
STEP 2
OPTION A: Clamp Installation
Mount Pole (C) to Clamp (B) using
C
M6x16mm Screws (S-A). Tighten using 4mm Allen Wrench (T-A). Apply the Rubber B Pads (I) to the underside of Clamp (B), then attach Clamp (B) to the desktop.
S-A
I
T-A
OPTION B: Grommet Base Installation
Separate Clamp (B) by removing the
B
screws in back with 4mm Allen Wrench
(T-A). Remove the screw from the top
of Clamp Bolt (B1), then remove Clamp
Bolt (B1). Apply Rubber Pads (I) to the
bottom of Grommet Base (E). Place
T-A
Support Plate (G) onto Clamp Bolt (B1),
then insert Clamp Bolt (B1) through the
grommet hole and thread into Pole (C)
as shown in the diagram.
E
I
C
G
B1 3
STEP 3
Slide Pole Cable Clip (H) and Arm (A) onto Pole (C). Secure Arm (A) to Pole (C) using 5mm Allen Wrench (T-B).
A H C
T-B
STEP 4
Attach Arm Cable Clips (F) to Arm (A) as shown.
A
4
STEP 5
Insert two screws (M-A or M-B) and M5 Washers (M-C) into the top mounting holes of the monitor, making sure to leave 3mm of thread exposed. Align screws in monitor over the slots in the VESA plate. Secure using two more Screws (M-A or M-B) and M5 Washers (M-C) in the bottom two holes of the monitor. Tighten all four screws using a Phillips screwdriver.
5
STEP 6
Adjust the tilt joint using 6mm Allen Wrench (T-C).
T-C
STEP 7
Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Pole Cable Clip (H) for future adjustments.
T-C H
T-B
6
STEP 8
Tighten the joints in Arm (A) using 8mm Allen Wrench (T-D) with 19mm Wrench (T-E) and 6mm Allen Wrench (T-C).
T-D
T-C
A
T-EF
STEP 9
Route cables through Arm Cable Clips (F) and Pole Cable Clips (H). F
H
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 06/01/2022 REV3
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Single Monitor Desk Mount with Extra Long Arm – VIVO - desk solutions, screen mounting, and more
