Hytronik Hc005s-bt Built-in Microwave Motion Sensor Owner's Manual

HC005S-BT Built-In Microwave Motion Sensor

Built-in Microwave Motion Sensor with
HC005S/BT
ON/OFF CONTROL

5.0 SIG Mesh

Product Description

HC005S/BT is a Bluetooth built-inmicrowave motion sensor with ON/OFF

control. It is designed for professional lighting manufactures who would like

to incorporate wireless control into their luminaires. HC005S/BT is suitable

for any typical indoor applications such as office, classroom, car park,

warehouse and other commercial/industrial areas. With Bluetooth wireless

mesh networking, it makes communication much easier without any

hardwiring, which eventually adds values to luminaires and saves costs for

projects. Meanwhile, simple device setup and commissioning can be done

via

app.

App Features Quick setup mode & advanced setup mode Floorplan feature to simplify project planning Web app/platform for dedicated project management Koolmesh Pro iPad version for on-site configuration Grouping luminaires via mesh network Scenes Detailed motion sensor settings Dusk/Dawn photocell (Twilight function) Schedule to run scenes based on time and date Astro timer (sunrise and sunset) Staircase function (master & slave) Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Device social relations check Bulk commissioning (copy and paste settings) Power-on status (memory against power loss) Offline commissioning Different permission levels via authority management Network sharing via QR code or keycode Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio Continuous development in progress…

Hardware Features

Photocell AdvanceTM

Photocell Advance

ON/OFF control with load ratings of: – 300VA (capacitive) – 400W (resistive)

Compact design

Zero crossing detection circuit to reduce in-rush current and prolong relay lifetime

Loop-in and loop-out terminals for efficient installation

5-year warranty

5.0 SIG mesh

iOS

Android

for iOS

for Android

Smartphone app for both iOS & Android platform

for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com

Subject to change without notice.

Edition: 18 Jun. 2021 Ver. A2 Page 1/4

Technical Specifications
Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol

2.4 GHz – 2.483 GHz 4 dBm 10~30m
5.0 SIG Mesh

Sensor Data

Sensor principle Operation frequency

High Frequency (microwave) 5.8GHz+/-75MHz

Transmission power Detection range

0.2mW
Max installation height6m Max detection range10m (diameter)

Detection angle

30°~150°

Environment Operation temperature Case temperature(MAX.) IP rating

Ta: -20OC ~ +50OC Tc:+75° IP20

Input & Output Characteristics

Operating voltage

220_240VAC 50/60Hz

Stand-by power

<1W

Load ratings Warming-up

300VA(capacitive),400W(resistive) 20s

Safety & EMC EMC standard (EMC) Safety standard (LVD)
Radio Equipment (RED) Certification

EN55015, EN61000, EN61547 EN60669-1/2-1
AS/NZS 60669-1/-2-1 EN300400, EN301489-1/-3 EN301489-17, EN62479,
EN300328 Semko,CB, CE , EMC, RED, RCM

* The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
Mechanical Structure & Dimensions
Photocell AdvanceTM
Daylight sensor Antenna module
Bluetooth module

4.2 36.5

65 71.7 80.5

26 12.1

Power supply 220-240V out control
Photocell AdvanceTM
Daylight sensor Antenna module
Bluetooth module

23.8 24.9

36.5 43.8
50

Subject to change without notice.

4.2 65
Power supply 220-240V out control
Edition: 18 Jun. 2021 Ver. A2 Page 2/4

23.8 26

Sensor Installation: In order to ensure good product performance, please avoid sensor being installed at or well below the LED gear tray/aluminum plate. It is highly recommended to expose the antenna part and Photocell AdvanceTM daylight sensor part by making a cut-out hole. For the Bluetooth module part, the cut-out hole is also recommended when the luminaire design is in a very confined metal environment where the Bluetooth signal transmittion can be potentially blocked or affected.

Wiring Diagram

Control gear Control gear Control gear

Ceiling mounted height(m) Wall mounted height (m)

Detection Pattern

0

5

10% 30% 50% 75%
6
Ceiling mounted detection pattern (m)

0

9
10% 30% 50% 75%
4
Wall mounted detection pattern (m)

Subject to change without notice.

Edition: 18 Jun. 2021 Ver. A2 Page 3/4

Additional Information / Documents
1. For full explanation of Hytronik Photocell AdvanceTM technology, please kindly refer to www.hytronik.com/download ->knowledge ->Introduction of Photocell Advance
2. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
4. Regarding precautions for microwave sensor installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Microwave Sensors – Precautions for Product Installation and Operation
5. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
6. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.

Edition: 18 Jun. 2021 Ver. A2 Page 4/4

References

• Catalogue_Hytronik
• iot.koolmesh.com