Jojo Water Tank Float Valve Kit Instructions

Water Tank Float Valve Kit

Product Information: Water Tank Float Valve Kit

The Water Tank Float Valve Kit is designed for backup water
installations. The kit includes a 20mm accessory adaptor, two
40/20mm reducers, a 50/40mm full thread reducer, and a float valve
with a threaded rod and float ball.

What’s Included in the Kit?

1. 20mm accessory adaptor
2. 2x 40/20mm reducers
3. 50/40mm full thread reducer **Note: This fitting is only
   required for tanks bought before the year 2020.
4. Float valve with valve, threaded rod, and float ball

Assembly Instructions:

1. Assemble the float valve by screwing on both the valve (A) and
   the float ball (C) to the threaded rod (B). Tighten the lock nuts
   to secure the assembly.
2. Fit the 50/40 full thread reducer (3) to your tank inlet.
3. Fit one 40/20mm reducer (2) to the front of your 50/40mm full
   thread reducer (3) on the outside of the water tank.
4. Fit the float valve (4) to the other 40/20mm reducer (2), and
   fit the entire assembly to the inside of your 50/40mm reducer (3)
   on the inside of the water tank. **Note: This step is only required
   for tanks bought before the year 2020.
5. If you want to adjust the shut-off height of the float valve,
   loosen the wingnut on the arm of the valve and angle it to the
   desired point.
6. If you want to fill the tank using a hose pipe, fit the 20mm
   accessory adaptor (1) to the front of your 40/20mm reducer
   (2).
7. If you are not going to use a hose pipe, you can connect your
   plumbing line directly to the 40/20mm reducer (2). Use a ball valve
   in front of your 40/20 reducer to stop the water flow when
   maintenance is required.
8. Now all that is left to do is to simply fill your tank with
   water.

Product Usage:

To use the Water Tank Float Valve Kit, you can either connect it
to a hose pipe or directly to your plumbing line. If you want to
fill your water tank without manual intervention, connecting it to
your plumbing line is the best way to go. For this application, you
will not require the 20mm accessory adaptor supplied as part of
this kit. However, if you want to fill the tank using a hose pipe,
you will require standard clip-on hose connections to fit your hose
to the 20mm accessory adaptor supplied as part of this kit.

Using our Water Tank Float Valve Kit
for backup water installations

WHAT’S INCLUDED IN THE KIT?

1. 20mm accessory adaptor 2. 2x 40/20mm reducers 3. 50/40mm full thread reducer **
** Note: this fitting is only required for tanks bought before the year 2020.

4. Float valve
A Valve B Threaded rod C Float ball

APPLICATION

Connect it to a hose pipe Pair this kit with a hose pipe for easy filling of your water tank as and when required.
Note: you will require standard clip-on hose connections to fit your hose to the 20mm accessory adaptor supplied as part of this kit.

Connect it directly to your plumbing If you want to fill your water tank without manual intervention, connecting it to your plumbing line is the best way to go.
Note: for this application you will not require the 20mm accessory adaptor supplied as part of this kit.

Page 1 of 2

Using our Water Tank Float Valve Kit
for backup water installations

4

1

23

2

A

B

C

ASSEMBLY

01
Assemble the float valve by screwing on both the valve (A) and the float ball (C) to the threaded rod (B). Tighten the lock nuts to secure the assembly.
05
Note: The shut-off height of the float valve can be adjusted by loosening the wingnut on the arm of the valve and angling it to the desired point.

02
Fit the 50/40 full thread reducer (3) to your tank inlet. Tip: it is advised to utilise the inlet, as it is the fitting closest to the tank lid, which allows for easy access to the assembly when required. ** See note above.

03
Fit one 40/20mm reducer (2) to the front of your 50/40mm full thread reducer (3) on the outside of the water tank.

06
Should you want to fill the tank using a hose pipe, fit the 20mm accessory adaptor (1) to the front of your 40/20mm reducer (2).

07
If you are not going to use a hose pipe, you can connect your plumbing line directly to the 40/20mm reducer (2). Tip: use a ball valve in front of your 40/20 reducer to stop the water flow when maintenance is required.

04
Fit the float valve (4) to the other 40/20mm reducer (2) , and fit the entire assembly to the inside of your 50/40mm reducer (3) on the inside of the water tank. ** See note above.
08
Now all that is left to do, is to simply fill your tank with water.

Page 2 of 2