40mm Female Water Tank Fitting
Product Information:
The 40mm Water Fitting is a standard fitting that is used as the
outlet at the bottom of water storage tanks. It consists of a front
section, a back section, and a seal that is fitted in between the
two. The fitting is designed to be used with thread tape for all
connections.
Product Usage Instructions:
- Ensure that you have all the required components, including the
40mm Water Fitting and thread tape. - Locate the outlet at the bottom of your water storage tank
where you want to install the fitting. - Insert the back section of the fitting and the seal into the
outlet from inside the tank. - Wrap thread tape around the threads of the front section of the
fitting. - Insert the front section of the fitting from outside the tank
and screw it onto the back section until it is tight. - Check for any leaks and tighten the fitting if necessary.
Note: It is important to follow these instructions carefully to
ensure a proper and secure installation of the 40mm Water
Fitting.
Fitting the 40mm Water Fitting
Standard fitting used as the outlet at the bottom of our water storage tanks
COMPONENT REQUIRED
40mm Water Fitting
Important: It is advised to use thread tape for all connections.
USAGE INSTRUCTIONS
The 40mm Water Fitting has a front (1) and a back (3) section, as well as a seal (2) that is fitted in between the two.
When fitting it to your tank, the back of the fitting and the seal are fitted from the inside of the tank, while the front is fitted from the outside.
Page 1 of 1
