Rainhead Rainwater Harvesting Tanks
Product Information:
Connecting a gutter to your tank
The product includes the following components:
- Downpipe B
- Rainhead C
- Gutter A
- Elbow & T’s F (as per setup requirements)
- First Flush Rainwater Diverter D
- 110mm Plumbing Pipe E
The product also includes a 75mm adapter that allows you to
connect either 110mm, 80mm or 75mm plumbing pipe to your Rainhead.
However, if your installation includes a First Flush Rainwater
Diverter, it is always advised to use 100mm or 110mm pipe from your
Rainhead to your Diverter tube.
Product Usage Instructions:
Step 1: Direct existing downpipe to Rainhead
(C).
Step 2: Install the Rainhead (C) as per the
installation instructions on our website (located on the product
page).
Step 3: Install the First Flush Rainwater
Diverter (D) as per instructions provided on our website (located
on the product page).
Step 4: Cut a hole of 110.5mm in the middle of
the lid and fit the pipe through the hole.
Tip: An additional 480mm Filter Screen can be
fitted underneath the lid to keep out smaller debris and further
improve the quality of harvested rainwater. Just ensure to clean it
out regularly.
Connecting a gutter to your tank
A basic how to guide
COMPONENTS REQUIRED
Downpipe B Rainhead C
A Gutter
F Elbow & T’s
(as per setup requirements)
First Flush Rainwater Diverter
D
110mm Plumbing Pipe
E
Page 1 of 2
Connecting a gutter to your tank
A basic how to guide
INSTALLATION
01
Direct existing downpipe to
Rainhead (C).
C
C
02
Install the Rainhead (C) as per the installation instructions on our website (located on the product page).
03
Install the First Flush Rainwater Diverter (D) as per instructions provided on our website (located on the product page).
04
Cut a hole of 110.5mm in the middle of the lid and fit the pipe through the hole.
Tip
An additional 480mm Filter Screen can be fitted underneath the lid to keep out smaller debris and further improve the quality of harvested rainwater. Just ensure to clean it out regularly.
Did you know?
Our Rainhead is supplied with an
75mm
adapter that allows you to connect
either 110mm, 80mm or 75mm
80mm
plumbing pipe to your Rainhead?
If however your installation
includes a First Flush Rainwater
Diverter, we always advise using
100mm
110mm pipe from your Rainhead to
your Diverter tube.
Page 2 of 2
